Evolution 15CC (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the recommended fuel to oil ratio for break-in?
The recommended fuel to oil ratio for break-in is 20:1. This ensures proper lubrication and helps the piston ring and liner develop a good seal. After the first gallon of fuel, you can switch to a 32:1 ratio for normal operation.
What type of fuel should be used for this engine?
This engine requires a 20:1 gas to oil ratio for break-in and a 32:1 ratio for normal operation. Use high-quality 2-stroke oil, such as Evolution Synthetic 2-Cycle Oil (EVOX1001Q), and avoid using Amsoil synthetic oil in any form.
How should the fuel be mixed?
To mix fuel for a 20:1 ratio, add 6.75 oz of 2-stroke oil to one gallon of 87–93 octane fuel. For a 32:1 ratio, use 10.8 oz of oil per gallon. Always add the oil first, then the fuel, to ensure proper mixing.
What are the safety precautions when operating the engine?
Always keep spectators, especially children, at least 30 feet away. Ensure the propeller is securely attached and all fasteners are tightened. Never use hands or objects to stop the propeller. Wear safety glasses and keep fuel away from heat or sparks.
How do I install the engine on the airplane?
Secure the engine mount on the firewall and tighten all screws. Install the engine according to the manufacturer’s instructions. Ensure the engine is properly mounted to prevent vibration and potential separation from the fuselage.
How do I install the muffler?
Place a lock washer on each muffler screw, align the muffler gasket with the exhaust opening, and tighten the screws. After five fuel tanks, re-tighten the muffler screws to prevent loosening due to heat and vibration.
How do I connect the throttle linkage?
Attach the throttle linkage securely to the carburetor’s throttle arm. Adjust the throttle arm to be 90 degrees to the pushrod. Center the throttle servo and use a clevis to connect the linkage to the servo arm.
How do I adjust the throttle opening?
Lower the throttle and center the trim. Adjust the linkage length so the throttle opens 1mm. Test by moving the throttle stick and trim to confirm the throttle closes. If reversed, re-bind the radio system to set the correct failsafe position.
What are the recommended propellers for this engine?
The recommended propellers are 13 x 6 for break-in and 14 x 6 for normal flight. These sizes provide optimal performance, and the engine has been tested to work well within this range.
How do I break in the engine?
Break in the engine by flying a series of figure-eight maneuvers at full throttle. Use a 20:1 fuel ratio for the first gallon, and gradually transition to a 32:1 ratio. Follow the break-in steps carefully to ensure proper piston ring and liner expansion.