Evolution EVOE10GX (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the recommended fuel to oil ratio for this engine?
The engine requires a 20:1 gas to oil lubricant ratio to operate and last a long time. Using a higher ratio may void the warranty. To mix, add 6.75 oz of 2-stroke oil to one gallon of 87–93 octane fuel.
What type of fuel filter should I use for the engine?
Use a quality inline filter like the EVOA105 and an in-tank felt filter clunk like the EVOA106. These filters are critical for removing dirt and air bubbles from the fuel system.
How should I mount the engine on the airplane?
Secure the engine mount on the airplane firewall and tighten all mounting screws before each flight. Ensure the engine is properly aligned and mounted to prevent vibration and separation from the fuselage.
What is the recommended propeller size for break-in?
Use a 10 x 6 propeller during the break-in process. This provides a light load and high RPM, which, when combined with engine heat, helps properly break in the engine.
How often should I tighten the muffler screws?
Tighten the muffler screws after five tanks of fuel. After the first three full tank runs, tighten the through-bolt again to prevent loosening due to heat and vibration.
What safety precautions should I take when operating the engine?
Always keep spectators, especially children, at least 30 feet away. Ensure the propeller is securely attached, keep your face and body away from the propeller path, and never use your hands to stop the propeller. Store fuel safely and away from heat sources.
What type of tubing should I use for the fuel lines?
Use Viton® fuel tubing (EVOA104) for its resistance to high temperatures and durability. Avoid Tygon® or Neoprene tubing, which can degrade quickly under heat.
How do I connect the throttle linkage to the carburetor?
Attach the throttle linkage securely to the throttle arm on the carburetor. Adjust the throttle arm to be 90 degrees to the pushrod, center the throttle servo, and use a clevis to connect the linkage to the servo arm.
What is the recommended tank size for the fuel system?
Choose a tank between 6–8 oz (170–240 mL) for optimal performance. Tanks smaller than 6 oz may not provide enough fuel, while larger tanks add unnecessary weight.
How should I break in the engine for optimal performance?
Break in the engine using a 10 x 6 propeller and full throttle figure-eight maneuvers. After two full tanks, switch to an 11 x 6 propeller and repeat. Ensure the fuel ratio is correct and adjust the needle settings if needed during the process.