Black+Decker KA900E (78 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to adjust the sanding belt tracking?
To adjust the sanding belt tracking, ensure the tool is switched off and unplugged. Turn the belt tracking knob as required until the sanding belt runs straight along the length of the arm.
What safety precautions should be taken when using the tool?
Always stay alert and use common sense when operating the tool. Avoid using it while tired or under the influence of drugs, alcohol, or medication. Wear protective equipment such as eye protection, dust masks, and ear protection. Keep the tool away from moisture and ensure the work area is clean and well-lit.
How to fit a sanding belt?
Move the belt tensioning lever to the front position. Place the sanding belt over the front and rear pulleys, sliding it through the slot in the housing. Move the tensioning lever to the rear position and adjust the belt tracking as needed.
What should I do if the power tool switch does not turn it on and off?
Do not use the power tool if the switch does not control its operation. This is a dangerous condition and the tool must be repaired before use to ensure safety.
How to safely use the tool when sanding paint?
When sanding paint, use a vacuum extractor for dust collection. Take special care when sanding lead-based paint and ensure all persons in the work area wear a mask designed for protection against lead paint dust and fumes. Do not eat, drink, or smoke in the work area.
How to empty the dustbag?
To empty the dustbag, pull it to the rear and off the tool. Hold the spout down and shake the dustbag to empty its contents. Slide the dustbag back onto the tool and ensure it is securely located.
What are the technical specifications of the KA900E?
The KA900E has a voltage of 230V, power input of 350W, no-load speed of 900-1,600 min-1, and a weight of 1.6 kg. It also has sound pressure levels of 84 dB(A) and vibration emission values of 1.7 m/s².
How to replace the mains plug?
To replace the mains plug, safely dispose of the old plug. Connect the brown lead to the live terminal and the blue lead to the neutral terminal. Do not connect to the earth terminal. Use a 5A fuse and follow the instructions provided with the plug.
What should I do if the sanding belt becomes damaged?
If the sanding belt is damaged, have the tool repaired before use. A damaged belt can lead to accidents and reduce control over the tool, increasing the risk of injury.
How to maintain the tool for optimal performance?
Regularly clean the ventilation slots and motor housing using a soft brush or damp cloth. Avoid using abrasive or solvent-based cleaners. Check the condition of the sanding belt and replace it when necessary to ensure safe and efficient operation.
Related products from Black+Decker
KA85
User manual 56 pages
XTA80E
User manual 56 pages
XTA80EK
User manual 56 pages
KA85E
User manual 56 pages
KA85EK
User manual 56 pages
BEW210
User manual 56 pages
BEW230K-QS
User manual 60 pages
BEW230
User manual 60 pages
KA401
User manual 60 pages
AST6
User manual 64 pages
FG005
User manual 64 pages
CD110
User manual 64 pages
CD105
User manual 64 pages
CD115
User manual 64 pages
KA160
User manual 68 pages
KA160K
User manual 68 pages
KA161
User manual 68 pages
KA902E
User manual 72 pages
KA330E
User manual 80 pages
BDCDS18
User manual 84 pages