Black+Decker KA902E (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should be taken when using the tool?
Keep the work area clean and well-lit to prevent accidents. Avoid using the tool in explosive atmospheres, such as near flammable liquids, gases, or dust. Keep children and bystanders away while operating the tool. Always wear eye protection and use personal protective equipment like a dust mask, non-skid shoes, and hearing protection.
How should the tool be connected to power?
Ensure the power plug matches the outlet and never modify the plug. Use an extension cord suitable for outdoor use if working outside. If operating in a damp location, use a residual current device (RCD) protected supply to reduce the risk of electric shock.
What should be done before starting the tool?
Ensure the switch is in the off position before connecting to power or a battery. Remove any adjusting keys or wrenches before turning the tool on. Never carry the tool with your finger on the switch to prevent accidents.
How to adjust the sanding belt tracking?
Move the belt tensioning lever to the front position, place the belt over the pulleys, and slide it through the slot. Adjust the belt tracking knob until the belt runs straight along the length of the arm. Ensure the arrows on the belt face the same direction as the arrows on the housing.
How to fit the dust cassette or deflector?
Fit the dust cassette over the dust extraction outlet and slide it onto the tool. To remove, pull it to the rear and off the outlet. When sanding metal, always fit the deflector over the dust extraction outlet and secure it properly.
What are the recommended speeds for different materials?
Use high speed for wood, medium speed for veneer and synthetics, and low speed for acrylic glass, non-ferrous metals, and paint removal. Adjust the speed control knob accordingly to match the material being worked on.
How to maintain the tool for safety and performance?
Keep the cutting tools sharp and clean to reduce binding and improve control. Regularly clean the ventilation slots and motor housing with a soft brush or damp cloth. Avoid abrasive or solvent-based cleaners. Check for misalignment or damage and repair the tool before use.
What should be done when sanding paint?
Use a vacuum extractor for dust collection to reduce health hazards. Pay special attention to lead-based paint and ensure all persons in the work area wear a mask designed for protection against lead dust and fumes. Avoid eating, drinking, or smoking in the work area.
The vibration emission values are 1.7 m/s² (triax vector sum) according to EN 62841. These values may vary depending on the actual use conditions and should be considered when assessing exposure to vibration.
How to empty and clean the dust cassette?
Empty the dust cassette every 10 minutes of use by pulling it to the rear and off the tool. Remove the cover, shake the cassette to empty the contents, and clean the filter regularly. Replace the filter and refit the cover securely.
Related products from Black+Decker
KA85
User manual 56 pages
XTA80E
User manual 56 pages
XTA80EK
User manual 56 pages
KA85E
User manual 56 pages
KA85EK
User manual 56 pages
BEW210
User manual 56 pages
BEW230K-QS
User manual 60 pages
BEW230
User manual 60 pages
KA401
User manual 60 pages
AST6
User manual 64 pages
FG005
User manual 64 pages
CD110
User manual 64 pages
CD105
User manual 64 pages
CD115
User manual 64 pages
KA160
User manual 68 pages
KA160K
User manual 68 pages
KA161
User manual 68 pages
KA900E
User manual 78 pages
KA900E
User manual 92 pages
KA330E
User manual 80 pages