GRAPHITE 59G201 (92 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the auxiliary handle?
The auxiliary handle should be installed in one of the holes on the grinder head. Using the auxiliary handle reduces the risk of hand contact with the rotating disc or brush during operation.
How to secure the grinding disc?
To secure the grinding disc, press the disc lock button, insert the special key into the two holes of the outer collar, turn the key to loosen the collar, remove the collar and disc. When installing, the disc must be pressed tightly against the inner collar surface.
What safety precautions should be taken when using the tool?
Always wear eye and ear protection. Ensure the grinding disc is properly mounted and secure. Do not use damaged or worn discs. Avoid using the tool in a way that could cause sparks or debris to fall on people or flammable materials.
How to adjust the main handle position?
Before starting work, adjust the main handle position to the most convenient angle for the task. The handle can be set in three positions by rotating it 90 degrees each time. Press the lock button to secure the handle in the desired position.
What should be done if the grinding disc is damaged?
If the grinding disc is damaged, cracked, or worn, it should be replaced immediately. Do not use a damaged disc as it can cause serious injury or equipment failure.
How to replace the carbon brushes?
To replace the carbon brushes, remove the brush cover, take out the old brushes, clean any carbon dust with compressed air, insert new brushes, and secure the cover. After replacement, run the tool without load until the brushes align with the commutator.
What are the technical specifications of the tool?
The angle grinder has a rated voltage of 230 V AC, 50 Hz frequency, 2400 W power, 6000 min-1 no-load speed, M14 spindle thread, 230 mm maximum disc diameter, 22.2 mm disc hole diameter, Class II insulation, and a mass of 5.7 kg.
What are the noise and vibration levels?
The acoustic pressure level is 95 dB(A) with a variation of 3 dB(A). The acoustic power level is 106 dB(A) with a variation of 3 dB(A). The weighted acceleration of vibrations is 6.641 m/s² with a variation of 1.5 m/s².
How to clean the tool?
Never use water or other liquids to clean the tool. Use a brush to clean the grinder. Regularly clean the ventilation slots to prevent motor overheating. Take regular breaks during operation to avoid overuse.
What should be done if the tool malfunctions?
If the tool malfunctions, stop using it immediately and contact an authorized service center. Do not attempt to repair the tool yourself unless you are qualified and use original replacement parts.
Related products from GRAPHITE
59G261
User manual 104 pages
59G261
User manual 33 pages
59G321
User manual 44 pages
59G321
User manual 84 pages
59G323
User manual 44 pages
59G323
User manual 84 pages
59G392
User manual 48 pages
59G335 DELTA
User manual 64 pages
59G346
User manual 83 pages
59G347
User manual 84 pages
59G086
User manual 88 pages
59G206
User manual 92 pages
59G206
User manual 192 pages
59G770
User manual 104 pages
59G062
User manual 184 pages
59G186
User manual 184 pages
59G098
User manual 185 pages
59G072
User manual 188 pages
59G093
User manual 192 pages