GRAPHITE 59G261 (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to attach the abrasive paper to the sander?
To attach the abrasive paper, align its holes with the holes on the sanding disc and press firmly to ensure effective dust extraction. Use perforated paper to allow dust to pass through the holes into the dust extraction system. Always clean the disc before replacing the paper with a brush or cloth.
How to extend the reach of the sander?
To extend the reach, loosen the locking nut on the handle, insert the extension handle into the handle tube, fit the reducer sleeve into the locking nut, adjust the desired length, and tighten the locking nut securely. This allows for working on high areas like ceilings without a ladder.
How to connect the dust extraction hose?
Attach the suction hose to the end of the handle or extension handle. Loosen the locking nut, insert the hose end into the fitting, and secure it by tightening the locking nut. Connect the other end of the hose to the dust extraction system, ensuring the dust collector is compatible with gypsum dust.
What is the operating voltage of the sander?
The sander operates on a voltage of 230 V AC. Always verify that the voltage matches the rating on the device's nameplate before plugging it in to avoid damage or safety hazards.
How to adjust the speed of the sander?
Use the speed control knob on the sander's body to adjust the rotational speed. The speed should be set based on the type of abrasive paper used, the hardness of the material being sanded, and the type of work being performed. Turning the knob increases or decreases the speed of the sanding disc.
What safety precautions should be taken when using the sander?
Always wear a dust mask and safety goggles to protect against harmful gypsum dust. Ensure the dust extraction system is connected and functioning properly. Keep the power cord away from moving parts, and never touch moving components. Avoid working in wet conditions and ensure the workspace is free from bystanders.
How to replace the sanding disc?
To replace the sanding disc, loosen and remove the mounting screw securing the disc. Replace the old disc with a new one and secure it with the screw. Always use a new disc to maintain performance and safety.
What are the technical specifications of the sander?
The sander has a rated voltage of 230 V AC, operates at 50 Hz, has a power rating of 600 W, and a no-load speed range of 600-1500 rpm. The maximum length of the sander is 1100-2000 mm, with a 225 mm diameter sanding disc and 225 mm diameter abrasive paper. It is class II with IP20 protection and weighs 5.5 kg.
What are the noise and vibration levels of the sander?
The sander produces an acoustic pressure level of 85 dB(A) and an acoustic power level of 96 dB(A). The weighted acceleration of vibrations is 3.18 m/s². These levels are important for assessing the user's exposure to noise and vibration during operation.
How to maintain the sander for optimal performance?
Regularly clean the sander and its vents to prevent overheating. Use only original replacement parts and ensure the dust extraction system is always connected. Store the sander in a dry place, out of reach of children. Replace worn or damaged parts immediately to maintain safety and efficiency.
Related products from GRAPHITE
59G321
User manual 84 pages
59G321
User manual 44 pages
59G323
User manual 44 pages
59G323
User manual 84 pages
59G392
User manual 48 pages
59G335 DELTA
User manual 64 pages
59G346
User manual 83 pages
59G347
User manual 84 pages
59G086
User manual 88 pages
59G206
User manual 92 pages
59G206
User manual 192 pages
59G201
User manual 92 pages
59G770
User manual 104 pages
59G062
User manual 184 pages
59G186
User manual 184 pages
59G098
User manual 185 pages
59G072
User manual 188 pages
59G093
User manual 192 pages