M7 QA-412 (66 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum air pressure allowed for the tool?
The maximum recommended air pressure during operation must not exceed 90 psi (6.3bar). Exceeding this pressure can create unsafe conditions for both the tool and the user.
How should the air supply be prepared before use?
Before connecting the hose to the tool, clean it with a blast of compressed air to remove moisture and dust. This prevents rust or malfunction caused by contaminants entering the tool.
What safety precautions should be taken during operation?
Always wear hearing and eye protection, avoid loose clothing, and ensure the work area is clean and free of clutter. Also, never use the tool in explosive environments or near flammable materials.
How often should the tool be lubricated?
The tool should be lubricated every 3 to 4 hours of operation. Use only the recommended pneumatic oil, as other lubricants can damage the tool and reduce its performance.
What should be done before replacing the grinding stone?
Before replacing the grinding stone, turn off the air supply and disconnect the air hose. Ensure the tool is stable and in a safe location to prevent accidental start-up.
What are the requirements for the air hose and piping?
The inlet pipe diameter should be as specified, the branch pipe should be twice the inlet diameter, and the primary air supply pipe should be three times the inlet diameter. The inlet pipe length should be less than 15 feet (4.5m).
What should be checked before using the grinding stone?
Before use, ensure the grinding stone is compatible with the tool, has no cracks or chips, and is mounted securely. Also, confirm that its operating speed is higher than the tool's maximum speed.
What is the minimum gripping length for the grinding stone?
The minimum gripping length on the stem of the shank stone should be at least 10mm. This ensures a secure fit and prevents slippage during operation.
How should the tool be maintained after use?
After use, apply 4 or 5 drops of pneumatic oil into the air inlet and run the tool for several seconds. Regular maintenance should be performed every 3 to 4 hours of operation.
What should be done if the tool vibrates excessively?
If the tool vibrates excessively during operation, stop immediately and inspect it for defects. Ensure the grinding stone is properly mounted and the air pressure is within the recommended range.