SICK W4F (110 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to adjust the sensing range of the sensor?
The sensing range can be adjusted using a potentiometer or the teach-in button. For potentiometer adjustment, clockwise rotation increases the sensing range, while counterclockwise rotation decreases it. For teach-in adjustment, press the teach-in button for approximately 1-3 seconds to set the sensing range. Fine-tuning can also be done using the potentiometer without pressing the teach-in button.
What are the application conditions for the sensor?
The sensor requires a background as a reference for accurate detection. The radiance factor and position of the background should remain as uniform as possible. The maximum distance between the sensor and background, as well as the minimum object height, must be maintained. The sensor is typically used to detect very flat objects on a conveyor belt.
What is the recommended sensing range for optimal performance?
The recommended sensing range for optimal performance is indicated in the characteristic line diagram. This range depends on the distance between the sensor and background, the minimum object height, and the radiance factors of both the background and the object. Refer to the associated diagram for precise values.
How to check if the sensor is aligned correctly?
To check alignment, ensure the sensor emits a visible red light beam that hits the objects. The optical opening (front screen) of the sensor must be completely clear. Align the sensor with the background and adjust its position so that the red light beam reaches the objects. Refer to the alignment diagram for guidance.
What are the electrical connection requirements for the sensor?
The sensors must be connected in a voltage-free state. The pin assignments and wire colors are specified in the electrical connection table. Use brown (BN), white (WH), blue (BU), and black (BK) wires for connections. Ensure all electrical connections are established before applying voltage.
What is the purpose of the status indicators on the sensor?
The status indicators provide visual feedback on the sensor's operation. The yellow LED indicates the status of the received light beam, while the green LED indicates that the supply voltage is active. The BluePilot blue indicator shows the sensing range display.
What is the maximum permissible tightening torque for the sensor?
The maximum permissible tightening torque for the sensor is less than 0.4 Nm. Ensure that the sensor is mounted with this torque limit to avoid damage. Also, note the preferred direction of the object relative to the sensor as shown in the alignment diagram.
How to perform a test run after installation?
After installation, run the conveyor belt without any objects. If the yellow LED indicator lights up permanently during the test run, the sensing range is set correctly. If the yellow LED does not light up briefly, reduce the sensing range slightly to increase the minimum object height and recheck the detection.
What are the technical specifications of the sensor?
The sensor has specific technical specifications, including dimensional drawings, electrical connection details, and process data structure. Refer to the technical specifications section for detailed information on the sensor's dimensions, wiring, and data structure for integration with control systems.
What is the purpose of the foreground suppression feature?
The foreground suppression feature ensures that the sensor can detect objects even in the presence of a background. This is achieved by adjusting the sensing range and using the teach-in button to set the threshold for background suppression, allowing the sensor to focus on detecting objects rather than the background.
Related products from SICK
W9-3
User manual 54 pages
W9-3
User manual 144 pages
LFP Inox
User manual 116 pages
LFP Inox
User manual 56 pages
WTB4-3P2100S13
User manual 38 pages
WL12G-3P3572S12
User manual 48 pages
WLA12L
User manual 212 pages
WE34
User manual 164 pages
WS34
User manual 131 pages
WS34
User manual 164 pages
WTF12L
User manual 232 pages
WTF12V
User manual 232 pages
OLS20
User manual 4 pages
PowerProx - WTT12L
User manual 70 pages
PowerProx - WTT12L
User manual 93 pages
PowerProx - WTT12L
User manual 140 pages
PowerProx - WTT12L
User manual 164 pages
RAY10
User manual 144 pages
RAY10
User manual 166 pages
RAY10
User manual 184 pages