HT Instruments HT2236 (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to turn on the device?
Press and hold the /MEAS button to power on the device and start measurements in the currently selected mode. The device will automatically shut off after about 15 seconds of inactivity.
How to select measurement modes?
Press the MODE button cyclically to access and select from the two groups of possible measurements: RPM (non-contact), rPm (contact), HZ (frequency), and various speed units. Holding the MODE button for more than 3 seconds allows access to additional functions like REV, M, In, FT, and Yd.
How to save measurement data?
Press the MEM button to save results after measurements. Up to 40 memory locations are available, each storing 10 instant values, 10 max values, 10 min values, and 10 average values. Data saved in the same location (DATA0…DATA9) will overwrite the previous value. To save results, press /MEAS to start the measurement, then press MEM while holding /MEAS.
How to recall saved data?
With the device on and in HOLD mode, press the MEM button cyclically to display previously saved values in sequence: instant, max, min, and average. Holding the MEM button allows rapid scrolling through memory locations without cycling through saved values.
What is the power source for the device?
The device is powered by a 1x9V IEC 6F22 battery inserted into the unit. It can also operate with an external power supply providing 6V to 9VDC, max 1A. A low battery is indicated by the symbol
How to replace the battery?
When the battery is low, indicated by the symbol
What are the safety precautions?
Do not use the device in environments with gas, explosive materials, or in dusty conditions. Avoid using the device if there are anomalies such as deformation, cracks, or display issues. The device emits a laser pointer (Class 2 according to EN60825-1), so never point the beam at eyes to prevent physical harm.
How to perform non-contact speed measurements?
Use the laser pointer to reflect off a reflective tape placed perpendicular to the laser beam axis. The device measures RPM for non-contact applications, using the reflective tape on the surface being measured. Ensure the tape is positioned correctly for accurate readings.
What are the measurement units available?
The device supports various units including RPM (non-contact and contact), HZ (frequency), and speed units such as M/M, In/M, FT/M, YD/M. It also measures length in meters, inches, feet, and yards using a rubber-threaded terminal with a 10cm circumference.
How to handle long-term storage?
After a long period of storage, allow the device to return to normal operating conditions before use. Ensure the device is stored in a safe environment and check for any potential damage before use. Replace the battery if the device will not be used for an extended period.