HT Instruments HTA105 (115 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to turn the device on or off?
Pressing the ON/OFF button powers the device on or off. When turning it on, the device performs a 3-second countdown before displaying the measurement screen to allow internal sensors to warm up.
What does the HOLD function do?
The HOLD function freezes the measured values on both displays. Pressing the HLD button activates or deactivates this function, and the 'HOLD' symbol appears at the top of the screen.
How to enable backlight on the display?
Press the /SET button to toggle the display backlight on or off. Holding the /SET button for more than 2 seconds accesses the device settings section (see section 4.4).
How to change the unit of measurement for air velocity?
Press the UNIT button to select the unit of measurement for air velocity from the options: m/s, ft/min, km/h, MPH, knots. This button also allows parameter selection within the settings section.
How to change the unit of measurement for temperature?
Press the UNIT button to select the temperature unit from °C (Celsius) or °F (Fahrenheit). This button also allows selection of volumetric flow units (CPM or CMM) and parameter settings within the settings section.
How to activate the MAX and MIN functions?
Press the MAXMIN button repeatedly to activate the maximum and minimum detection for selected parameters (air velocity, temperature, humidity, and volumetric flow). Each press displays the current maximum or minimum value with the corresponding symbol.
How to calculate the average value of measurements?
Press the MEAN button to activate the average calculation function for measured values (air velocity, temperature, humidity, and volumetric flow). This function can calculate averages over time or at specific points.
How to set the unit of measurement for duct area?
Press the /SET button for more than 2 seconds to enter the settings mode. Use the UNIT or UNIT buttons to select the unit of measurement for duct area from in², m², or ft².
How to disable the auto power-off feature?
In the settings section, use the UNIT or UNIT buttons to select 'oFF' for auto power-off. If enabled, the device will automatically turn off after approximately 20 minutes of inactivity.
How to set the atmospheric pressure?
In the settings section, use the UNIT or UNIT buttons to set the atmospheric pressure value in hPA (mbar). This value is important for accurate air velocity measurements and can be obtained from other instruments or meteorological stations.