Megger TDR2000 (161 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum distance the TDR2000 can detect faults?
The TDR2000 can detect faults up to 16 kilometers away by combining adjustable gain settings and increasing pulse widths, allowing for the identification of cable issues even at long distances.
How does the TDR2000 use Time Domain Reflectometry (TDR)?
The TDR2000 uses Time Domain Reflectometry, which sends narrow electrical pulses along a cable. These pulses travel at a speed determined by the cable's insulation and resistance. Changes in impedance cause reflections, which the TDR2000 measures to determine the distance to the fault.
What are the different operation modes of the TDR2000?
The TDR2000 has four operation modes: L1 only, L1 and L2 for comparison, L1-L2 for difference mode, and Xtalk mode. Each mode is used to analyze different aspects of cable faults and reflections.
How does the TDR2000 handle cable impedance changes?
Impedance changes in a cable cause reflections of the transmitted pulse. Higher impedance results in normal reflections, while lower impedance causes inverse reflections. Matched terminations absorb the pulse, preventing any reflection and making the cable appear endless.
What is the purpose of the balance control on the TDR2000?
The balance control adjusts the internal balance circuit to match the cable's impedance, reducing the dead zone and allowing the detection of cable features closer to the test leads. This improves the accuracy of fault identification.
How does the TDR2000 calculate the distance to a fault?
The TDR2000 calculates the distance to a fault by measuring the time between the transmitted pulse and the reflected pulse. This time is multiplied by the speed of light and the velocity factor to determine the actual distance to the fault.
What is the velocity factor and how is it used?
The velocity factor is a scalar that converts the measured time interval into an actual cable length. It can be displayed as a ratio of the pulse speed to the speed of light or as a distance per microsecond. Accurate velocity factor settings are essential for precise distance calculations.
How many memory locations does the TDR2000 have?
The TDR2000 has 15 memory locations that can store traces from previously tested cables, along with gain, range, and mode settings. These stored traces can be used for comparison or analysis using the TRACEMASTER software.
What is the role of the gain setting on the TDR2000?
The gain setting on the TDR2000 amplifies the reflected signal, allowing the user to discern reflections from farther away. It can be adjusted in 6dB increments from 0dB to 90dB, enhancing the instrument's ability to detect faults.
How can the TDR2000 be used for cable condition monitoring?
The TDR2000 can monitor the gradual ageing of a cable by comparing previous test results with live results. This helps detect characteristic changes over time, such as water ingress or cable tapping, enabling proactive maintenance.
Related products from Megger
DLRO100
User manual 24 pages
DLRO100EB
User manual 18 pages
DLRO100XB
User manual 18 pages
TDR2000/3P
User manual 31 pages
BM224
User manual 12 pages
DLRO2
User manual 12 pages
DLRO2
User manual 40 pages
BM222
User manual 12 pages
BM221
User manual 12 pages
BM223
User manual 12 pages
DLRO100HB
User manual 18 pages
8 Mk7 AVOMETER
User manual 44 pages
TDR1000/2P
User manual 126 pages
TDR1000
User manual 213 pages