PeakTech P1665 (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum allowable input voltage?
The device can handle a maximum input voltage of 1000V DC or AC. Exceeding this limit may cause damage to the equipment and pose serious safety risks.
How should I clean the device?
Clean the device only with a damp, lint-free cloth and mild detergent. Avoid using abrasive cleaners as they can damage the housing or lead to internal short circuits.
What safety precautions are required when measuring voltages over 35V DC or 25V AC?
Measurements of voltages above 35V DC or 25V AC must be conducted in accordance with relevant electrical safety regulations. Higher voltage levels can result in dangerous electric shocks, so ensure all precautions are taken to avoid personal injury.
What should I do if the battery indicator lights up?
Replace the battery immediately when the BAT symbol illuminates. Weak battery power may lead to inaccurate measurements and could potentially cause electrical shocks or physical harm.
Can this device be used in explosive environments?
No, the device is not suitable for use near flammable or explosive materials. It should only be operated in safe conditions where there is no risk of exposure to such substances.
What are the maximum input values for different functions?
The maximum allowable inputs vary by function: 1000A AC/DC for current, 1000V AC/DC for voltage, and 600V AC/DC for resistance, capacitance, frequency, diode test, and type K temperature measurement.
How do I activate the backlight of the display?
Press and hold the HOLD/-Taste for two seconds to turn on the background illumination. The light will automatically shut off after approximately 30 seconds if not used further.
What is the purpose of the REL-Taste (Relative Measurement Function)?
The REL-Taste allows relative measurements by storing a displayed value as a reference point. Any subsequent measurement shows the difference between this stored reference and the current reading, which helps in comparing changes over time.
How do I switch between AC and DC modes?
Use the MODE-Taste to toggle between AC and DC measurements. This function is also used for activating additional features like diode testing or continuity checks when using the resistance (Ω) setting.
What should I do if the device shows a short circuit during measurement?
If the device detects a short circuit, stop all measurements immediately and inspect the connections. Ensure that no voltage is applied to the test leads or under-test equipment before continuing any further testing.
Related products from PeakTech
P 1525
User manual 38 pages
P 1530
User manual 38 pages
P 1535
User manual 38 pages
P 1560
User manual 38 pages
P 2705
User manual 51 pages
9022
User manual 56 pages
9040
User manual 57 pages
1100
User manual 61 pages
4040
User manual 65 pages
9021
User manual 80 pages
DVB-S
User manual 80 pages
DVB-S2
User manual 80 pages
9020
User manual 82 pages
P2755
User manual 101 pages
P1205
User manual 104 pages
4035
User manual 120 pages
1300
User manual 169 pages
P1270
User manual 175 pages