VOLTCRAFT DO-500 (64 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the DO-500 used for?
The DO-500 is a dissolved oxygen meter designed to measure oxygen levels in non-conductive, non-flammable, and non-corrosive liquids. It is suitable for use in home environments, fish ponds, swimming pools, photolabs, and greenhouses, but not for industrial applications.
How do I install the batteries?
To install the batteries, first remove the two screws on the battery compartment cover using the provided hex key. Place four AAA batteries in the compartment with the correct polarity, then reattach the cover and ensure the gasket is properly seated.
How do I calibrate the device?
To calibrate the DO-500, remove the sensor cap, press the power button to turn on the device, then press the MODE button to select the O2 mode. The device will then enter calibration mode, and you can follow the on-screen instructions to complete the process.
What are the safety precautions?
Keep the device away from children and pets. Avoid exposing it to extreme temperatures, direct sunlight, or flammable gases. Do not disassemble the device, and replace batteries promptly if they are leaking or damaged to prevent chemical burns.
How do I maintain the sensor?
The sensor must remain moist to ensure accurate readings. If the sensor becomes dry, add a small amount of the provided electrolyte to the membrane cap. Replace the membrane cap if it becomes damaged or worn out.
What units of measurement are available?
The DO-500 allows you to switch between Celsius and Fahrenheit for temperature readings. It also displays dissolved oxygen levels in mg/l, ppm, and O2 (%), depending on the selected mode.
How do I clean the device?
To clean the device, use a soft cloth to wipe the exterior. For the sensor, ensure it is kept moist with the provided electrolyte. Avoid using harsh chemicals or abrasive materials that could damage the sensor or housing.
What should I do if the display becomes dim?
If the display becomes dim, it may indicate low battery power. Replace the batteries immediately. If the issue persists, check the sensor and ensure it is properly maintained and not damaged.
Related products from VOLTCRAFT
DT 2 L / k
User manual 42 pages
2368174
User manual 44 pages
2368174
User manual 44 pages
2633254
User manual 44 pages
VC-11840870
User manual 44 pages
VC-12637405
User manual 44 pages
BT-2
User manual 52 pages
Energy Logger 4000
User manual 56 pages
Energy Logger 4000
User manual 58 pages
TT100
User manual 60 pages
PL-125-T2USB
User manual 62 pages
SEM-3600BT
User manual 64 pages
SEM-3600BT
User manual 64 pages
LCR 4080
User manual 66 pages
DO-600
User manual 68 pages
PHT-600
User manual 72 pages
PHT-200
User manual 76 pages
2239527
User manual 104 pages
SDM-2125
User manual 104 pages
Gamma Check Pro
User manual 116 pages