Evolution FURY5-S (136 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum depth of cut at 90 degrees?
The maximum depth of cut at 90 degrees is 85mm or 3-1/4 inches, allowing for precise cutting of materials such as mild steel and wood.
What is the weight of the machine?
The machine weighs 20.14kg or 44.4lbs, making it suitable for use in various workshop environments while maintaining stability during operation.
What safety precautions should be taken when using the machine?
Always wear safety goggles, ear protection, and dust protection to prevent injury from flying debris, noise, and dust. Ensure the machine is properly secured and never leave it unattended while running.
What is the recommended blade for the machine?
The machine is designed to use special Evolution blades. Ensure the blade is correctly installed, sharp, and clean to avoid binding and kickback, and always use the correct blade diameter and thickness for the material being cut.
What should be done if the machine is used outdoors?
Avoid using the machine in wet or damp conditions. If outdoor use is necessary, use a residual current device (RCD) and ensure the tool is protected from rain. Use a clean, dry workbench and avoid placing the tool on damp surfaces.
How should the riving knife be adjusted?
Adjust the riving knife as described in the instruction manual to ensure proper spacing, positioning, and alignment. This helps reduce the likelihood of kickback and ensures safe operation during cutting.
What are the risks of using a damaged blade?
Using a damaged or incorrect blade can lead to binding, kickback, and loss of control. Always inspect the blade for damage and replace it if necessary to maintain safe and efficient operation.
What should be done if the machine is left unattended?
Always turn off the machine and disconnect the power cord before leaving it unattended. An unattended running saw is an uncontrolled hazard and can lead to serious injury or damage.
What is the recommended procedure for cutting through materials?
Use the rip fence or mitre gauge to guide the workpiece and avoid freehand cutting. Feed the workpiece into the blade against the direction of rotation and use push sticks or blocks to maintain a safe distance from the blade.
What should be done if the saw blade binds?
If the saw blade binds, immediately turn off the tool, unplug it, and clear the jam. Jamming can cause kickback or stall the motor, so it is important to address the issue before resuming operation.
Related products from Evolution
RAGE8
User manual 64 pages
R185CCSL
User manual 112 pages
R185CCSL
User manual 308 pages
026-0007
User manual 40 pages
026-0008
User manual 40 pages
R185 CCSL
User manual 40 pages
R185 CCSL
User manual 144 pages
R185 CCSL
User manual 200 pages
R185 CCSL
User manual 208 pages
FURY 3-S
User manual 144 pages
FURY 3-S
User manual 272 pages
FURY 3-S
User manual 208 pages
FURY 3-S
User manual 200 pages
FURY 3-S
User manual 40 pages
F165CCSL
User manual 40 pages
FURY3
User manual 208 pages
RAGE5-S
User manual 60 pages
RAGE5-S
User manual 108 pages
RAGE5-S
User manual 132 pages
FURY3-XL
User manual 208 pages