Evolution RAGE5-S (108 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum thickness of mild steel that can be cut?
The maximum thickness of mild steel that can be cut is 6mm (1/4 inch). This is the optimal thickness for cutting mild steel using this machine.
What is the power rating of the motor in the UK?
The motor in the UK is rated at 220-240V ~ 50Hz. This is the standard voltage and frequency for electrical power in the UK and EU regions.
What is the weight of the machine when fully assembled?
The gross weight of the machine when fully assembled is 35kg (77.2 pounds). This includes the legs and all components of the machine.
What is the maximum depth of cut for wood at a 90-degree angle?
The maximum depth of cut for wood at a 90-degree angle is 83mm (3-1/4 inches). This is the maximum depth achievable when cutting wood perpendicular to the blade.
What is the noise level of the machine during operation?
The noise level of the machine during operation is 93.2dB(A) for sound pressure and 106.2dB(A) for sound power. These levels are measured in accordance with standard noise measurement procedures.
What safety precautions should be taken when using the machine?
When using the machine, always wear safety goggles, ear protection, and dust protection. Ensure the machine is properly grounded, and never operate it in wet or damp conditions. Keep your hands away from the blade and use push sticks for feeding the workpiece.
What is the recommended blade type for this machine?
The machine is designed to be used with special Evolution blades. Only use accessories and blades recommended by Evolution Power Tools to ensure safe and efficient operation.
What are the dimensions of the machine when the legs are attached?
The dimensions of the machine when the legs are attached are 1050 x 750 x 940mm (41-1/8 x 29-1/2 x 37 inches). These dimensions include the leg assembly and are important for ensuring proper setup and stability.
What is the speed of the machine when unloaded?
The speed of the machine when unloaded is 2500 revolutions per minute (rpm). This speed is important for cutting performance and should be considered when selecting the appropriate blade and material.
What is the recommended practice to prevent kickback?
To prevent kickback, always use the riving knife and anti-kickback device, ensure the fence is aligned properly, and avoid feeding the workpiece in the same direction as the blade rotation. Use push sticks and never place your hands near the blade during operation.