Atag II (94 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the Direct heating circuit modules II and III?
The Direct heating circuit modules II and III are mono-temperature hydraulic modules designed to control multizone/multitemperature heating systems. They are equipped with energy-efficient modulating pumps and can be used to expand heating installations.
How many circuits can be created with these modules?
Up to three circuits can be created using the Direct heating circuit modules II and III. All circuits must be equipped with the same radiator system to ensure consistent performance.
What are the operating temperature limits for the modules?
The modules are designed to operate within a maximum direct temperature of 85°C. The system must also maintain a pressure between 0.5 and 3 bar to ensure safe and efficient operation.
What safety precautions should be taken during installation?
During installation, ensure the module is mounted on a solid wall and that the installation site is protected from volatile corrosive agents. Always switch off the mains power before performing any work, and ensure all electrical connections are properly insulated and rated for the system's requirements.
How should the module be connected to the boiler?
The module must be connected to a suitably-sized heating system in accordance with its performance levels. Before connecting, flush the system tubes, ensure the primary circuit pressure does not exceed 3 bar, and confirm the flow temperature does not exceed 85°C.
What is the role of the isolation valve on the module?
The isolation valve on the module allows for easier maintenance procedures by isolating the module from the rest of the system. This ensures safe and efficient servicing without disrupting the entire heating system.
What are the electrical requirements for the module?
The module requires a power supply of 230V at 50Hz. The electrical system must be capable of providing the maximum power required by the module, and the wire cross-section must be at least 1.5 mm² to ensure safe operation.
How can the outdoor temperature be used for control?
An outdoor temperature sensor can be connected to the module's SE terminal block. This allows the module to use the outdoor temperature for control purposes, particularly when connected to the boiler via the ATAG zone connection, overriding any boiler-mounted sensors.
What are the key components of the hydraulic system?
The hydraulic system includes balancing headers, zone-specific circulation pumps, isolation valves, non-return valves, and flow/return valves. These components work together to manage water flow and pressure across multiple heating zones.
What should be done before connecting the module to the system?
Before connecting the module to the system, ensure the primary circuit pressure does not exceed 3 bar, the flow temperature does not exceed 85°C, and all safety and operating devices are properly installed. Also, verify that the expansion vessel is appropriately sized for the system's water content.