ESYLUX EM10015519 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the motion detector react to movement?
The motion detector reacts to moving heat sources such as people or vehicles by detecting changes in thermal radiation within its field of detection. It activates connected systems like lighting for a preset duration based on the set light value.
What is the maximum range of the RCi series detectors?
The maximum range varies depending on the model and installation height, but generally ranges from approximately 5 meters to 20 meters. The exact distance can be adjusted using mechanical or electronic controls.
How do you adjust the field of detection for different environments?
You can horizontally rotate the sensor head by +/-90 degrees, mechanically adjust each sensor's range via internal lens masks, and use a customisable covering cap to mask specific areas. These adjustments help optimise performance based on local conditions.
What are the available light value settings?
The light value can be continuously adjusted between 2 lux and 2500 lux. This allows you to customise sensitivity according to ambient lighting levels in different environments.
How do you activate or deactivate the anti-creep protection feature?
Use the programming mode on the remote control (Mobil-RCi) to toggle 360° anti-creep protection. This prevents unwanted activation from small animals or movement near the base of the detector.
What is the purpose of the test modes?
Test mode allows you to verify the motion detection functionality without activating connected systems. In loaded test mode, both the system and blue LED flash for 1 second on and 2 seconds off when movement is detected. Load-free test mode only activates the blue LED.
How do you reset the device to factory settings?
To return the motion detector to its original factory settings, use the Reset button on the Mobil-RCi remote control while in programming mode. This will restore default parameters such as light value (10 lux), duration (2 minutes), and range.
What is the impulse mode used for?
Impulse mode activates the system for approximately 1 second, followed by a 9-second pause during which no movement is detected. This setting is ideal for applications like stairwell lighting or doorbell activation where brief illumination is required.
How do you adjust the on-period duration?
The on-period can be adjusted from as short as an impulse (1 second) to up to 30 minutes. This allows for customisation of how long lighting or other connected systems remain active after detecting movement.
What are the safety considerations when installing this device?
Ensure that power is turned off before installation, and use a 10 A circuit breaker to protect against short circuits. Maintain at least 1 meter distance from lighting sources to avoid interference with internal sensors. Install on stable surfaces like walls or ceilings.
Related products from ESYLUX
PD-C360i/8 mini KNX
User manual 6 pages
MD 360/8
User manual 2 pages
MD 180i/R
User manual 4 pages
MD-C 360i/12 mini
User manual 2 pages
MD-C 360i/12 mini
User manual 2 pages
PD 360/24 SLAVE
User manual 2 pages
PD-FLAT 360i/6 mini DALI
User manual 2 pages
PD-CE360i/24
User manual 4 pages
PD-C360i/12 mini KNX
User manual 6 pages
MD-CE360i/24
User manual 4 pages
MD-CE360i/8
User manual 4 pages
PD-CE360i/8
User manual 4 pages
MD-C360i/8 mini
User manual 6 pages
RC 230i KNX
User manual 17 pages
EM10015472
User manual 17 pages
EM10015311
User manual 68 pages
EM10015212
User manual 68 pages
EM10015618
User manual 68 pages
EM10015649
User manual 68 pages
EM10015717
User manual 68 pages