STEINEL IS D360 (69 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to adjust the detection range of the sensor?
The IS D360 sensor allows adjustment of its detection range based on installation height. At a mounting height of 2.5 meters, the maximum reach is up to 8 meters. The adjustable cover can be used to block out lens segments or reduce coverage as needed.
What are the technical specifications for power and voltage?
The IS D360 sensor operates on a wide range of voltages including AC 50–240 V, with a maximum current rating of 5 A. It supports various lamp types such as incandescent, fluorescent (corrected or uncorrected), LED, and capacitive loads.
How to set the twilight sensitivity on the sensor?
The twilight setting adjusts the light level at which the motion detector activates. This can be adjusted between 2 Lux and 2000 Lux using a screw. For daylight testing, ensure the adjustment is set to 'daylight' mode.
What are the functions of the manual override feature?
The manual override allows you to keep lights on for up to four hours by switching the sensor off and back on twice. This function can be used in addition to automatic detection, providing control over lighting without interference from motion.
How does the sensor handle temperature changes affecting performance?
The IS D360 is designed to minimize false triggers caused by sudden temperature fluctuations. However, extreme weather conditions like wind or rain can affect its operation and may require adjustments in placement or settings for optimal performance.
What are the recommended installation distances from other lights?
To avoid unintended activation of the sensor due to heat radiation, it is advised that the IS D360 be installed at least 50 cm away from any other light sources. This helps prevent false triggering and ensures accurate motion detection.
How can I adjust the on/off delay for the connected device?
The sensor allows adjustment of the time interval between detecting movement and turning off the lights, ranging from 5 seconds to 20 minutes. Adjusting this setting helps tailor the system's response based on specific usage patterns.
What safety precautions should be taken during installation?
Before installing the sensor, ensure that all electrical connections are de-energized and use a voltage tester for verification. Only qualified professionals should handle wiring to comply with local regulations such as DE-VDE 0100 or similar standards.
What types of lamps can be used with this sensor?
The IS D360 is compatible with various lamp types including incandescent, halogen, fluorescent (with electronic ballasts), and LED. It supports both low-voltage and standard voltage options depending on the application.
How to clean the detection lens if it becomes dirty?
If the sensor's detection lens gets dirty, it can be cleaned using a damp cloth without any cleaning agents. This helps maintain optimal performance by ensuring that no debris interferes with heat radiation detection.
Related products from STEINEL
IS345
User manual 70 pages
IS345
User manual 152 pages
IS345
User manual 64 pages
HPD 3 IP
User manual 37 pages
HPD 3 IP
User manual 40 pages
L20S
User manual 24 pages
L20S
User manual 24 pages
L22S
User manual 24 pages
L22S
User manual 24 pages
IS 2180-2
User manual 93 pages
IS 2180-2
User manual 248 pages
IS 2180-2
User manual 47 pages
NF 50 UP
User manual 43 pages
NF 50 UP
User manual 44 pages
IS3360
User manual 64 pages
IS3360
User manual 70 pages
IS3360
User manual 152 pages
IS3360 MX Highbay
User manual 58 pages
IS3360 MX Highbay
User manual 70 pages
IS345MX Highbay
User manual 58 pages