IME NEMO 96 HD (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to connect auxiliary power?
Connect auxiliary power to terminals 20 and 21. Ensure the wiring follows the specified diagram to avoid incorrect measurements or damage to the device.
What are the available connection types?
The device supports single-phase, three-phase 3-wire, and three-phase 4-wire configurations. Choose the appropriate schema based on your installation requirements.
How to set the display contrast?
The display contrast can be adjusted to four levels: 0%, 30%, 70%, and 100%. Select the desired level to optimize visibility under different lighting conditions.
What is the nominal current for external CTs?
The nominal current for external CTs can be set to either 1A or 5A, depending on the secondary rating of the current transformer used.
How to configure the start of energy counting?
Energy counting can be initiated by either voltage or active power. Set the threshold for voltage (phase voltage > 10V) or active power (programmable between 0 and 50% of nominal power).
What are the available integration times for current and average power?
Integration time can be set to 5, 8, 10, 15, 20, 30, or 60 minutes. The selected time applies to both current and average power measurements.
How to adjust the display backlight?
The display backlight can be set to four levels: 0%, 30%, 70%, and 100%. The backlight remains on at 100% if no key is pressed for more than 20 seconds.
How to set the external CT and VT ratios?
The CT ratio is set by entering the primary/secondary ratio (e.g., 800/5A = 160). The VT ratio is set similarly (e.g., 600/100V = 6). Adjusting these ratios will reset the energy counters.
How to access the diagnostic phase sequence function?
The diagnostic phase sequence function is available via the device software and requires a password. It allows you to view and modify the wiring sequence, provided the neutral conductor is correctly connected and there are no conductor crossings between CTs.
How to customize the display page?
Customize the display page by selecting which measurements appear in the three lines of the display. Choose from a list of available parameters such as voltage, current, power, and frequency, and save the configuration as the default display.
Related products from IME
CONTO D4-Pt
User manual 38 pages
CONTO D4-Pt
User manual 27 pages
Nemo 96HD
User manual 14 pages
Nemo 96HD
User manual 15 pages
Nemo D4-Dc
User manual 8 pages
Nemo D4-Dc
User manual 52 pages
Nemo D4-e
User manual 48 pages
Nemo D4-e
User manual 60 pages
Nemo D4-Le
User manual 96 pages
Nemo D4-Le
User manual 100 pages
Nemo 96HDLe
User manual 19 pages
CONTO D4-Pd
User manual 23 pages
CONTO D4-Pd
User manual 40 pages
CONTO D4-Pd
User manual 36 pages
CONTO D4-Pd
User manual 36 pages
CONTO D4-Pd
User manual 35 pages
CONTO D4-Pd
User manual 32 pages
CONTO D4-Pd
User manual 8 pages
CE4DMID32
User manual 14 pages
Conto D4-Pd MID
User manual 14 pages