Keysight U1252B (177 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I charge the battery?
To charge the battery, use the 24 V DC adaptor. Disconnect the test leads, connect the power cord to the DC adapter, and plug the Red (+)/Black (–) banana terminals to the V/Ω and COM terminals respectively. Ensure the polarity is correct and the mains supply voltage does not fluctuate by more than ±10%.
What safety certifications does the multimeter have?
The multimeter is safety-certified in compliance with EN/IEC 61010-1:2001, UL 61010-1 Second Edition, and CAN/CSA 22.2 61010-1 Second Edition. It offers CAT III 1000 V and CAT IV 600 V overvoltage protection with Pollution Degree II.
What is the battery capacity and charging warning?
The primary display shows 'bAt' and the 'SbY' flashes on the secondary display with a short tone to indicate battery status. If the battery capacity is over 90%, it is recommended not to charge it. A short tone also indicates charging completion after ten minutes, which is normal for rechargeable batteries.
How do I perform a voltage measurement?
To measure AC voltage, set the rotary switch to the appropriate mode, connect the red and black test leads to the V. mV (red) and COM (black) terminals, then probe the test points. For DC voltage, ensure the Filter is enabled if measuring from a mixed signal, then follow the same steps.
How do I enable the Filter function?
To enable the Filter, turn off the meter, hold the rotary knob while switching to a non-OFF position until you hear a beep. Scroll through the menu items until 'FiLtE' is shown, then press to enable the Filter and save your changes. This helps filter out high-frequency AC components for accurate DC voltage readings.
What are the input terminals and overload protection details?
The input terminals include COM for most functions, V. mV for voltage, and A for current. Overload protection includes a 30 kA/fast-acting fuse for current measurements, and the meter is designed to handle short circuit currents up to 0.3 A for voltage measurements.
How do I measure AC current?
To measure AC current, set the rotary switch to the appropriate mode, connect the red and black test leads to the µA.mA (red) and COM (black) or A (blue) and COM (black) terminals, then probe the test points in series with the circuit. Ensure the Filter is enabled if measuring from a mixed signal.
What functions can I access with the multimeter?
The multimeter supports functions such as voltage, current, resistance, capacitance, temperature, and diode testing. It also includes features like MIN/MAX/AVG recording, manual data logging, dual display, and offset adjustments for measured values.
How do I start data logging?
To start manual data logging, press the appropriate button for more than 1 second. To view logged data, press the button for more than 1 second and scroll through the data using the navigation buttons. To clear the data, press the clear button.
What accessories are included with the multimeter?
The multimeter includes silicone test leads, 4 mm probes, alligator clips, a printed Quick Start Guide, a certificate of calibration, a 9 V alkaline battery (for U1251B only), a rechargeable 8.4 V battery (for U1252B only), and a power cord and AC adapter (for U1252B only).
Related products from Keysight
U1242B
User manual 91 pages
U1241B
User manual 91 pages
U1232A
User manual 161 pages
U1231A
User manual 161 pages
U1233A
User manual 161 pages
U1272A
User manual 165 pages
U1272A
User manual 193 pages
U1271A
User manual 165 pages
U1271A
User manual 193 pages
U1251B
User manual 177 pages
U1251B
User manual 177 pages
U1253B
User manual 193 pages
U1273AX
User manual 219 pages
U1273A
User manual 219 pages
U1282A
User manual 309 pages
U1281A
User manual 309 pages