Log in


or


google Continue with Google

Already have an account?

Adaptec 29320A (83 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 3
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Adaptec 29320A is a SCSI host bus adapter designed for use in servers and workstations. It supports the SCSI-3 Ultra 160 standard, enabling high-speed data transfer rates of up to 160 MB/s. The adapter features a PCI interface, allowing for integration into systems with PCI expansion slots. It is compatible with a wide range of operating systems, including various versions of Windows, Linux, and UNIX. The device is built for reliability and performance, making it suitable for environments that require robust storage connectivity and data throughput.

Frequently Asked Questions

How many SCSI devices can the Adaptec SCSI Card 29320A support?

The Adaptec SCSI Card 29320A supports up to 15 Low Voltage Differential (LVD) and/or 15 Single-Ended (SE) SCSI devices. This allows for connecting large arrays of high-performance hard disk drives, external storage subsystems, and other SCSI peripherals.

What types of SCSI connectors does the Adaptec SCSI Card 29320A have?

The Adaptec SCSI Card 29320A includes one internal and one external 68-pin LVD connector, along with two internal SE SCSI connectors (one 68-pin and one 50-pin). These connectors allow for connecting various types of SCSI devices internally.

Can the Adaptec SCSI Card 29320A work in a 32-bit PCI slot?

Yes, the Adaptec SCSI Card 29320A is a 64-bit PCI/PCI-X card but can also operate in a 32-bit PCI slot. When installed in a 32-bit slot, it automatically runs in the slower 32-bit mode to ensure compatibility.

What is the recommended way to set SCSI IDs for devices connected to the Adaptec SCSI Card 29320A?

Each device connected to the Adaptec SCSI Card 29320A must have a unique SCSI ID between 0 and 15 on each channel. The card is preset to ID 7, and if you boot from a SCSI hard disk, ensure the hard disk is set to ID 0. Internal devices usually use jumpers, while external devices use switches on their back.

How should termination be handled for SCSI devices connected to the Adaptec SCSI Card 29320A?

Termination is required at the end of each SCSI cable to ensure reliable communication. Devices between the ends of the cable must have termination disabled. Ultra320/160 and Ultra2 SCSI devices require specific termination methods, and using the correct cables and terminators is essential for proper operation.

What type of cable is needed to connect internal Ultra320/160 or Ultra2 SCSI devices?

A special 68-pin internal LVD cable is required to connect internal Ultra320/160 or Ultra2 SCSI devices. These cables typically have twisted pairs or flat ribbon wiring, and some are laminated to lay flat. Internal LVD cables usually have a built-in terminator at the end.

How do you connect internal Ultra320/160 and Ultra2 SCSI devices to the Adaptec SCSI Card 29320A?

To connect internal Ultra320/160 and Ultra2 devices, locate a 68-pin internal LVD SCSI cable. Plug the non-terminated end into the internal LVD connector, then connect the devices to the other end, starting with the terminated end. Ensure proper termination is provided by the cable's built-in terminator.

How do you connect internal Wide SCSI devices to the Adaptec SCSI Card 29320A?

Internal Wide SCSI devices should be connected to the 68-pin internal SE Wide SCSI connector using a 68-pin Wide SCSI cable. Plug one end of the cable into the card's Wide SCSI connector and the other end into a terminated Ultra/Fast Wide SCSI device. Additional devices can be connected between the two ends, but they must be unterminated.

How do you connect internal Ultra/Fast Narrow SCSI devices to the Adaptec SCSI Card 29320A?

Internal Ultra/Fast Narrow SCSI devices with standard 50-pin connectors should be connected to the 50-pin internal SE Narrow SCSI connector. Use a 50-pin internal Ultra Narrow SCSI cable. Plug one end into the card's connector and the other end into the device, ensuring proper termination is provided by the cable.

What precautions should be taken when installing the Adaptec SCSI Card 29320A?

Before handling the card, discharge any static electricity by touching a grounded metal object. Turn off the computer and unplug the power cord before installation. Be cautious when inserting the card into a PCI slot, as some 32-bit slots may not accommodate it, and forcing the card could cause damage. Ensure the expansion slot is compliant with PCI Rev. 2.1 or PCI-X Rev. 1.0 and supports Bus Mastering.

Send answer

Additional user manuals for the same series

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5