Proxxon FF 400 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to unfold the instruction manual?
To unfold the instruction manual, please open the front and back pages for easy access to the information.
What are the technical specifications of the PF 400?
The PF 400 has a power of 400 watts, operates at voltages of 220–240 V, 50/60 Hz, and offers six spindle speeds: 180, 350, 550, 800, 1300, and 2500 rpm. It has a vertical travel of approximately 300 mm, a feed rate of 1.5 mm per revolution, and a maximum tool diameter of 40 mm.
How to adjust the spindle height?
The spindle height can be adjusted using the handwheel or the drill feed. To adjust with the handwheel, loosen the knurled screw, set the desired height, and tighten the screw again. For the drill feed, loosen the knurled screw, adjust the scale to zero, and then set the desired height.
How to install a collet?
To install a collet, first loosen the locking nut, place the desired collet into the locking nut, and gently press it into place. Then, insert the tool shaft into the collet, and secure the collet using the provided wrench. To remove, loosen the locking nut and pull the tool out.
How to adjust the spindle speed?
To adjust the spindle speed, use the belt drive system. The motor power is transmitted through two poly-V belts and a two-stage gear system, allowing for six different spindle speeds: 180, 350, 550, 800, 1300, and 2500 rpm. Each speed corresponds to a specific belt pulley combination.
How to secure the workpiece?
The workpiece must be securely fastened using clamping jaws, screw stocks, or other suitable clamping tools. For precise operations, use spanner jaws or other clamping accessories to ensure stability and prevent movement during machining.
What safety precautions should be taken when using the machine?
Always wear safety goggles when operating the machine. Ensure the workpiece is securely fastened, and never touch moving parts. Always unplug the machine before making adjustments or changing tools to prevent accidental startup.
How to replace the belts?
To replace the belts, first unplug the machine. Loosen the locking nut, lift the cover, and remove the old belts. Install the new belts according to the pulley combinations specified in the manual, ensuring proper tension. Reassemble the cover and tighten the locking nut.
How to adjust the feed depth?
The feed depth can be adjusted using the handwheel or the drill feed. For the handwheel, loosen the knurled screw, set the desired depth, and tighten the screw again. For the drill feed, loosen the knurled screw, adjust the scale to zero, and then set the desired depth.
What tools are recommended for use with the machine?
Recommended tools include end mills with a maximum shaft diameter of 12 mm and a tool diameter of up to 40 mm. For precise operations, use fine feed attachments or other accessories provided in the accessory program. For specific applications, consult the accessory catalog for suitable tools.
Related products from Proxxon
MicroClick 200 Multi
User manual 30 pages
PS 13
User manual 38 pages
PS 13
User manual 42 pages
PS 13
User manual 50 pages
ofv
User manual 42 pages
MT300
User manual 46 pages
MICROCUTTER MIC
User manual 55 pages
MICROCUTTER MIC
User manual 58 pages
FF 500
User manual 60 pages
FF 500
User manual 64 pages
MOF
User manual 60 pages
MOF
User manual 70 pages
28568
User manual 60 pages
UT 400
User manual 60 pages
PF 400
User manual 80 pages
28472
User manual 90 pages