Log in


or


google Continue with Google facebook Continue with Facebook

Already have an account?

Davey Silensor (72 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Davey Silensor Pumps are designed for efficient and quiet operation in a variety of applications. These pumps feature a compact design, making them suitable for installation in confined spaces. They are constructed with durable materials to ensure long-lasting performance. The Silensor series is known for its low noise levels, which make it ideal for use in environments where noise reduction is important. The pumps are equipped with reliable sealing systems to prevent leaks and maintain efficiency. They are commonly used in residential, commercial, and industrial settings for water transfer and circulation purposes.

Frequently Asked Questions

How to properly prime the pump?

To prime the pump, remove the strainer basket lid and fill the strainer basket area with water. Replace the lid, ensuring it seals on the large oring. Connect to the power supply and switch on. Allow the pump to run to expel any trapped air. If prime is not established within two minutes, switch off the pump and repeat the procedure.

What are the minimum pipe sizes for suction and return lines?

The minimum suction line size is 50/63mm, and the minimum return to pool line size is also 50/63mm. Ensure that elbows are no closer than 250mm from the inlet to prevent issues with flow and pressure.

What should I do if the pump is not operating?

If the pump does not operate, check that the power is connected. For single-phase models, verify the power point by plugging in a portable appliance. Also, check fuses and the main power supply switch. If the automatic overload has tripped, allow the motor to cool and reset the power supply. Determine the cause of the overload and rectify it.

How to check for air leaks in the suction piping?

Air bubbles in the water flowing back to the pool indicate a leak in the suction piping. Inspect all piping for leaks and ensure the strainer basket lid is secure. If air leaks are detected, repair the suction piping to prevent damage to the pump.

What are the recommended water chemistry levels for the pool?

Maintain balanced water chemistry with a pH level between 7.2 and 7.8. Regularly treat the water with a chlorine sanitising agent, keeping the level below 3ppm. Salt levels should be maintained between 4000ppm and 6000ppm. Consult your local pool shop for regular water testing.

What is the recommended maintenance schedule for the pump?

Perform routine maintenance weekly, including checking pressure gauges, ensuring covers are secure, removing debris from the skimmer baskets, and inspecting wiring connections. Replace skimmer covers every 3 to 4 years and ensure all wiring and electrical equipment are in good condition.

What should I do if the pump runs but there is no water flow?

If the pump runs but there is no water flow, check if the filter requires backwashing or is blocked. Ensure the pump is properly primed. Inspect the suction piping for air leaks and confirm that all valves are fully open. Check the pool water level and ensure it is up to the skimmer box.

How to safely remove the pump from the pipework?

To remove the pump, switch off the power and unplug it from the power source. Close the water valves on the pool return and pump inlet. Remove the discharge and suction barrel unions carefully to avoid losing the orings. Move the pipework with the barrel unions attached until the pump can be pulled clear.

What are the electrical requirements for the pump?

Single-phase models require a nominal 220/240V 50Hz power supply, while three-phase models require a nominal 400V 50Hz supply. Ensure the pump is connected through a residual current device (RCD) with a rated residual operating current not exceeding 30mA. Power connections and wiring must be carried out by an authorised electrician.

What safety precautions should be taken when operating the pump?

Never run the pump dry as it can damage the mechanical seals and void the warranty. Ensure the pump is protected from weather and install check valves in the discharge line to prevent reverse rotation. Avoid blocking the suction and ensure the pump is installed in a safe and dry environment.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5