SPERONI CS (52 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum operating pressure for these pumps?
The maximum working pressure of the electric centrifugal pumps is 10 Bar.
Can children use this equipment safely?
Children aged from 8 years and above may operate the pump if they have been properly supervised or instructed in safe usage. Children must not play with the appliance, and cleaning or maintenance should never be performed by children without supervision.
What are the standard supply voltages for these pumps?
The standard supply voltage is 230 V at 50 Hz for all powers up to 7.5 kW. For higher power ratings, it can be 400/700 V at 60 Hz or 400/700 V at 50 Hz.
What materials are used in the construction of these pumps?
The pump body and support are made from cast iron, while the threaded counter flanges are stainless steel. The motor shaft is also stainless steel, with bronze impellers for high head applications and cast iron impellers for low head ranges.
What type of motors do these pumps use?
These electric centrifugal pumps utilize 2-pole electric motors that are enclosed, rated IP55, externally ventilated, and insulated to Class F standards. They are designed for reliable operation in various environments.
How should the suction line be installed to prevent cavitation?
To avoid cavitation, which can cause noise, performance loss, and mechanical stress on the pump, ensure that the following relation is observed: hp + hz ≥ (NPSHr + 0.5) + hf + hpv.
What are common applications for these pumps?
These electric centrifugal pumps are suitable for use in civil engineering, agriculture, and industry to pump non-aggressive liquids. Typical uses include water supply systems, irrigation schemes, pressure tank feeding, air conditioning, and heating.
What is the recommended installation orientation?
The pump should not be installed vertically with the motor facing downward in hot or damp environments to avoid condensation buildup inside the motor. It can be mounted horizontally, vertically, or at an angle as needed.
How do you check if a three-phase motor is rotating correctly?
To verify the correct rotation of a three-phase motor, briefly start the pump with liquid and observe its direction from the side. If it does not rotate counterclockwise when viewed from the suction port, reverse the connections.
What should be done if the pump fails to start?
If the pump fails to start, check for proper electrical supply and ensure that all safety contacts are clean and functioning. Verify that the motor is correctly connected according to the terminal markings on the cover plate.
Related products from SPERONI
PM 20
User manual 36 pages
CX
User manual 52 pages
ME
User manual 52 pages
MATIC 88-4
User manual 56 pages
MATIC 88
User manual 56 pages
CAM 100
User manual 65 pages
CAM 130 GA
User manual 65 pages
CAM 198 PA
User manual 65 pages
CAM 130
User manual 65 pages
CAM 60
User manual 65 pages
CAM 80 HL
User manual 65 pages
CAM 88 PA HL
User manual 65 pages
KS 801 P
User manual 65 pages