SPERONI ME (52 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum operating pressure?
The maximum operating pressure for these electric pumps is 10 Bar. This pressure rating ensures the pumps can handle a wide range of applications without exceeding safe limits.
What materials are used in the pump construction?
The pump body and support are made from G25 cast iron, while the motor shaft is stainless steel. Impellers are made from bronze for high head models and cast iron for low head models.
What is the recommended installation orientation?
For optimal performance and to avoid condensation, the pump should be installed in its normal position. Vertical installation with the motor facing downward is not recommended.
What are the standard supply voltages?
The standard supply voltages are 230/400 V for 50 Hz up to 7.5 kW and 400/700 V for higher power ratings. For 60 Hz, the standard voltage is 230/400 V for all power levels.
What is the maximum temperature of the pumped liquid?
The electric pumps are suitable for liquids with temperatures up to 90°C. This ensures compatibility with a wide range of applications, including hot water systems.
What should be done if the pump does not start?
If the pump does not start, check the power supply, verify that fuses are intact, and ensure that the protective device contacts are clean and not damaged. Replace any blown fuses and correct faulty connections.
How should the suction pipe be installed?
The suction pipe should have a slight positive slope towards the pump and use eccentric reducers to prevent air pockets. The diameter of the suction pipe should be at least equal to the pump inlet.
What should be done if the pump produces excessive vibrations?
Excessive vibrations may be caused by improper installation, loose components, or incorrect alignment. Ensure the pump is securely mounted and check for any loose parts or misalignment.
Related products from SPERONI
PM 20
User manual 36 pages
CS
User manual 52 pages
CX
User manual 52 pages
MATIC 88-4
User manual 56 pages
MATIC 88
User manual 56 pages
CAM 100
User manual 65 pages
CAM 130 GA
User manual 65 pages
CAM 198 PA
User manual 65 pages
CAM 130
User manual 65 pages
CAM 60
User manual 65 pages
CAM 80 HL
User manual 65 pages
CAM 88 PA HL
User manual 65 pages
KS 801 P
User manual 65 pages