Reely NEW2 (122 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I charge the vehicle's power pack?
To charge the vehicle's power pack, ensure it is fully discharged and placed on a heat-resistant, non-flammable surface. Use a compatible LiPo charger and connect it correctly with the proper polarity. Always allow the power pack to cool down for at least 5-10 minutes before and after charging. Never charge a damaged or swollen power pack, as this can cause a fire or explosion.
What safety precautions should I take when operating the vehicle?
Always maintain direct line of sight with the vehicle while driving. Avoid operating the vehicle in low temperatures, rain, or near power lines. Never leave the transmitter on while the vehicle is in motion. If the battery voltage drops too low, stop the vehicle immediately, disconnect the power pack, and replace or recharge it. Ensure the vehicle is not operated on public roads or private property without permission.
What types of batteries are compatible with this vehicle?
This vehicle is compatible with 2 or 3-cell LiPo power packs (7.4V or 11V) or 6 or 7-cell NiMH power packs (7.2V or 8.4V). Using power packs with more cells can cause overheating and damage to the vehicle's drivetrain. Always use a compatible charger and ensure the battery voltage is within the recommended range to avoid safety risks.
How do I program the speed controller?
To program the speed controller, refer to the instructions in the remote control manual. Adjust the neutral and full-throttle positions according to your preferences. Special functions can be configured for advanced control. Always reset the speed controller if any settings are changed or if the vehicle behaves unexpectedly. Ensure the speed controller is properly connected to the power pack and transmitter before use.
What should I do if the vehicle does not respond to the remote control?
Check that the power pack is fully charged and properly connected to the speed controller. Ensure the transmitter is turned on and the trim settings for throttle and brake are in the middle position. Verify that the remote control is within range and that the vehicle's receiver is functioning correctly. If the issue persists, refer to the troubleshooting section of the manual for further guidance.
How do I adjust the suspension settings?
To adjust the suspension, use the provided clips to modify the shock absorber settings. Ensure the vehicle is on a flat surface and the wheels are free to rotate. Adjust the suspension to achieve the desired handling characteristics for different terrains. Always test the adjustments in a safe environment before driving the vehicle on complex surfaces.
What should I do if the battery voltage drops below the recommended level?
If the battery voltage drops below the recommended level, the vehicle may slow down or stop responding to the remote control. Immediately stop the vehicle, disconnect the power pack, and replace or recharge it. Never attempt to use a low-voltage battery, as this can cause damage to the speed controller and other components. Always allow the battery to cool down before recharging.
How do I maintain the vehicle's performance over time?
Regularly inspect the vehicle for wear and tear, especially the tires, suspension, and drivetrain components. Replace worn-out parts promptly to maintain optimal performance. Clean the vehicle after each use to prevent dirt buildup and ensure smooth operation. Check the battery connections and ensure they are secure to avoid power loss during use.
What should I do with old or damaged batteries?
Old or damaged batteries should never be disposed of in regular trash. They should be taken to a designated recycling facility or battery disposal center. Never throw batteries into fire or water, as this can cause explosions or chemical leaks. Always use protective gloves when handling damaged batteries and store them in a cool, dry place away from flammable materials.
How do I ensure the vehicle is properly assembled before use?
Before operating the vehicle, ensure that the chassis and body are securely attached and all components are in place. Check that the wheels are free to rotate and the suspension is adjusted correctly. Verify that the remote control is properly connected to the speed controller and that the power pack is fully charged. Test the vehicle in a safe, open area to confirm that all systems are functioning correctly before driving on complex terrain.
Related products from Reely
Detonator
User manual 47 pages
Rockhard
User manual 100 pages
Truggy Overheater
User manual 37 pages
2348501
User manual 44 pages
RY-BT550
User manual 44 pages
ATOMIC-680
User manual 48 pages
Streetracer
User manual 48 pages
Earthcrusher
User manual 52 pages
Vector 65
User manual 54 pages
Leopard Pro 36
User manual 57 pages
2WD
User manual 60 pages
Speedy Mania
User manual 60 pages
Hiker SFX
User manual 60 pages
SZD-54
User manual 76 pages
2865870
User manual 80 pages
THOR
User manual 80 pages
X-Cellerator
User manual 80 pages
Mini Wavebreaker
User manual 81 pages
Dragontail
User manual 84 pages
Dragontail
User manual 124 pages