Reely Sparrow (108 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to choose the remote control mode?
The remote control mode can be selected using the Mode switch (see Figure 1, position 3). Mode 1 activates when the switch is moved to the left position, and Mode 2 activates when it is moved to the right position. Mode 1 assigns the right stick to motor function (THRO) and the left stick to elevator (ELEV), while Mode 2 assigns the right stick to elevator (ELEV) and the left stick to motor function (THRO).
How to insert batteries into the transmitter?
Use only alkaline batteries (1.5 V per cell) for the transmitter. Insert 4 batteries into the battery compartment, ensuring the correct polarity (plus and minus). A diagram indicating the correct orientation is located at the bottom of the battery compartment. Close the battery cover by pressing the latch into place.
What are the safety precautions for operating the model?
Always ensure the model is operated in a safe environment, away from people, animals, and objects. Check for visible damage before use, and ensure all moving parts function smoothly. Never operate the model if you are tired, under the influence of alcohol, or taking medication. Keep the model and transmitter away from direct sunlight or high heat.
How to charge the flight battery?
Charge the flight battery only after it has cooled down for at least 5-10 minutes. Use only the charger specified in the manual. Do not charge damaged or swollen batteries, as this can cause fire or explosion. Always disconnect the flight battery from the model after use and store it in a safe place.
What should I do if the model does not respond correctly?
Check the transmitter and receiver connection, and ensure the flight battery is fully charged. If the issue persists, refer to the troubleshooting section of the manual. Make sure the model is not obstructed and that the environment is safe for flight. If the problem continues, contact the manufacturer for further assistance.
How to mount the control surfaces?
Mount the elevator and aileron surfaces according to the instructions in the manual. Ensure the control surfaces are securely attached and that the linkage is properly adjusted. Check that all moving parts are free to move without excessive play. Proper mounting is essential for accurate flight control.
What are the battery safety guidelines?
LiPo and LiIon batteries can be dangerous if mishandled. Never short-circuit, disassemble, or throw batteries into fire. Avoid contact with skin or eyes, and use protective gloves if handling damaged batteries. Store batteries in a cool, dry place and never leave them unattended. Always use the correct charger and follow the manufacturer's guidelines.
How to perform the first flight?
Before the first flight, ensure the model is fully assembled and all components are securely attached. Check the transmitter settings and ensure the flight battery is fully charged. Perform a test flight in a safe, open area, and avoid flying near people or obstacles. Follow the steps for takeoff, flight, and landing as outlined in the manual.
How to maintain the model and transmitter?
Regularly inspect the model for signs of wear or damage, and replace any worn parts. Clean the transmitter and model after each use, and store them in a dry, cool place. Replace the propeller if it is damaged or worn. Ensure the flight battery is properly stored and charged, and follow the maintenance schedule provided in the manual.
What should I do in case of a malfunction?
First, identify the cause of the malfunction and resolve it before attempting to fly again. Check all connections, ensure the flight battery is fully charged, and verify that the transmitter is properly configured. If the issue persists, refer to the troubleshooting section of the manual. If the problem cannot be resolved, contact the manufacturer for support.
Related products from Reely
Detonator
User manual 47 pages
Rockhard
User manual 100 pages
Truggy Overheater
User manual 37 pages
2348501
User manual 44 pages
RY-BT550
User manual 44 pages
ATOMIC-680
User manual 48 pages
Streetracer
User manual 48 pages
Earthcrusher
User manual 52 pages
Vector 65
User manual 54 pages
Leopard Pro 36
User manual 57 pages
2WD
User manual 60 pages
Speedy Mania
User manual 60 pages
Hiker SFX
User manual 60 pages
SZD-54
User manual 76 pages
2865870
User manual 80 pages
THOR
User manual 80 pages
X-Cellerator
User manual 80 pages
Mini Wavebreaker
User manual 81 pages
Dragontail
User manual 84 pages
Dragontail
User manual 124 pages