Fluke Networks MicroScanner2 (156 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to switch between meters and feet?
To switch between meters and feet, hold down the '' and '' or '' and '' buttons while turning on the tester. Then press '' or '' to toggle between the units.
What does the warning symbol on the display indicate?
The warning symbol on the display indicates a cable fault or voltage on the cable. It also appears when the tester detects high voltage, which may pose a risk of fire, electric shock, or personal injury.
What safety precautions should be taken when using the MicroScanner?
To ensure safety, do not touch voltages greater than 30 V AC rms, 42 V AC peak, or 60 V DC. Avoid using the product around explosive gases or in damp environments. Always read the safety information before use and follow all instructions carefully.
How to turn the product on and off?
To turn the product on, press the key labeled ''. To turn it off, press the same key again. Ensure the battery door is closed and locked before operating the product.
What should be done if the product detects high voltage?
If the product detects high voltage, it will display a warning symbol. Immediately disconnect the tester from the power source and do not attempt to use it until the issue is resolved.
What does the '' indicator on the display mean?
The '' indicator on the display is the detail screen indicator. Press '' or '' during a cable test to scroll through detail screens and view additional information.
What does the '' indicator on the display mean?
The '' indicator on the display indicates a short on the cable. This means there is a continuity issue between two or more wires in the cable, which may affect signal integrity.
How to test for telephone voltage?
The '' indicator on the display shows telephone voltage. The symbols '' and '' appear over the positive (tip) and negative (ring) wires in the wiremap diagram, indicating the presence of voltage on the line.
What does the '' indicator on the display mean?
The '' indicator on the display indicates that a wiremap adapter or remote ID locator is connected to the far end of the cable. This is useful for locating and identifying cables during testing.
What should be done if the battery is low?
If the low battery indicator appears, replace the batteries immediately to prevent incorrect measurements. Always ensure the battery polarity is correct and disconnect all test leads before replacing the battery.