Milwaukee pH600 (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the storage solution for the pH600?
The storage solution for the pH600 is MA9015, a 230ml solution designed to preserve the electrode when not in use. Always store the electrode with a few drops of this solution in the protective cap.
How do I calibrate the pH600?
To calibrate the pH600, immerse the sensor in a pH 7.01 buffer solution (M10007B) up to the maximum immersion level. Wait for the reading to stabilize, then use a small screwdriver to adjust the pH 7 calibration trimmer until it reads 7.0. Always use fresh buffer solutions and never reuse them.
What type of batteries does the pH600 use?
The pH600 uses three 1.5V alkaline batteries (MA9300). Replace all three batteries when the device cannot be turned on or the display fades. Ensure correct polarity when inserting the batteries.
What should I do if the pH600 display is unstable?
An unstable display may indicate a lack of calibration, a dry electrode, or low battery power. Ensure the electrode is properly rinsed with water, recalibrate the meter using fresh buffer solutions, and check the battery level.
Can I use distilled or deionized water for storage?
No, do not use distilled or deionized water for storing the electrode. These types of water can damage the electrode and affect its accuracy. Always use the provided storage solution (MA9015) to keep the electrode safe.
What is the warranty period for the pH600?
The pH600 comes with a 2-year warranty against defects in materials and manufacturing. The probe is covered for 6 months. This warranty covers repair or free replacement if the meter cannot be repaired. Damage due to accidents, misuse, or lack of maintenance is not covered.
How do I clean the pH600 electrode?
After each use, rinse the electrode with water to minimize contamination. For deeper cleaning, use the general cleaning solution (MA9016). Avoid using harsh chemicals or abrasive materials that may damage the electrode surface.
What are the technical specifications of the pH600?
The pH600 has a measurement range of 0.0 to 14.0 pH with a resolution of 0.1 pH. Its accuracy is ±0.1 pH at 20°C, and the typical EMC deviation is ±0.2 pH. The operating temperature range is 5 to 50°C, with humidity up to 95% RH.
How should I dispose of the pH600 and its batteries?
Do not dispose of the pH600 or its batteries with household waste. Hand them over to appropriate collection points for recycling. Proper disposal helps prevent negative impacts on human health and the environment.
What should I do if the pH600 is not working properly?
If the pH600 is not functioning correctly, first check the battery level and ensure the electrode is clean and properly stored. If the issue persists, contact your local Milwaukee Instruments Technical Service for assistance. Provide details about the problem to help identify the cause.
Related products from Milwaukee
MW402
User manual 44 pages
MW600
User manual 62 pages
2236-40
User manual 15 pages
LDM50
User manual 253 pages
LED TAPE MEASURE
User manual 39 pages
MI414
User manual 46 pages
MI413
User manual 47 pages
MI412
User manual 49 pages
MI405
User manual 50 pages
4933385110
User manual 61 pages
4933385100
User manual 61 pages
MA871
User manual 126 pages
MW150 MAX
User manual 307 pages
MW170 MAX
User manual 322 pages
MW106 MAX
User manual 374 pages
MW306 MAX
User manual 409 pages
MW180 MAX
User manual 487 pages
MW805 MAX
User manual 492 pages