PeakTech 1190 (213 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum input voltage for the device?
The maximum input voltage must not be exceeded under any circumstances to avoid severe injury and/or damage to the device. If there is any doubt that the voltage may exceed the specified limits, the measurement voltage should be pre-damped according to a 10:1 ratio.
What safety precautions should be taken when using the device?
The device must not be used in high-energy circuits. Ensure the voltage setting matches the supply voltage before connecting. Use only grounded outlets, avoid wet or damp surfaces, and keep the device away from strong magnetic fields. Do not exceed the maximum input voltage, and never short-circuit fuses or fuse holders. Always follow the safety warnings on the device and never operate the device unattended.
How should the device be connected to the power supply?
Ensure the voltage setting on the device matches the supply voltage before connecting. Connect the device only to grounded outlets. Avoid placing the device on wet or damp surfaces. Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
What should be done if the device is not working properly?
If the device is not functioning correctly, do not attempt to repair it yourself. Only qualified service technicians should perform maintenance or repairs. Do not open the device or make any technical modifications. Always check for damage before using the device.
What are the specifications of the PeakTech® oscilloscope?
The PeakTech® oscilloscope has a bandwidth of 100 MHz (P 1190) or 200 MHz (P 1230), a sampling rate of 500 MSa/s (P 1190) or 1 GSa/s (P 1230) per channel, and a memory depth of 6000 points (P 1190) or 2,000,000 points (P 1230). It supports 20 automatic measurements, auto-scale, a color LCD screen, waveform storage, and various trigger functions.
What are the safety requirements for measuring high voltages?
Measurements of voltages over 35V DC or 25V AC must be performed in accordance with relevant safety regulations. Higher voltages can result in dangerous electric shocks. Use only isolated probes and cables, avoid exposed BNC or banana connectors, and do not insert metallic objects into the connectors. Always ensure the device is properly grounded and never exceed the maximum input voltage.
How should the device be cleaned?
Before cleaning, unplug the device from the power source. Use a damp, lint-free cloth and mild detergent. Avoid using abrasive or corrosive cleaning agents. Ensure no liquid enters the device, as this can cause a short circuit and damage the device.
What are the safety symbols and their meanings?
The device includes safety symbols such as 'Warning' for hazardous conditions and 'Caution' for potential damage. 'Danger' indicates high voltage, and 'Ground' indicates the earth connection. Always pay attention to these symbols to ensure safe operation.
What are the key features of the PeakTech® oscilloscope?
The PeakTech® oscilloscope includes a color LCD screen with high resolution and adjustable backlight, waveform storage and recall, FFT function, multiple trigger modes, and support for various languages. It also has a USB interface, automatic scaling, and a range of measurement functions for both analog and digital signals.
How do you switch between oscilloscope and logic analyzer modes?
Use the 'OSC/LA' button to switch between oscilloscope and logic analyzer modes. In oscilloscope mode, the 'Cursor' knob and 'Info' button are available for waveform analysis. In logic analyzer mode, the 'Cursor' knob allows setting cursor positions, and the 'Info' button provides information about the captured waveform.