PeakTech 2670 (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the insulation resistance measurement range?
The insulation resistance measurement range is from 0.125~4.000 MΩ to 1000 MΩ. The resolution varies depending on the range, with increments of 0.001MΩ, 0.01MΩ, 0.1MΩ, and 1MΩ. The accuracy is specified as ±2% + 10 digits for lower ranges and ±5% + 5 digits for higher ranges.
What are the safety precautions for using the device?
To ensure safe operation, always read the user manual thoroughly and make it available to others. Use the device only by trained personnel, avoid working with dangerous voltages unless you are an electrician, and follow all safety rules. Wear appropriate protective gear, avoid working in explosive or corrosive environments, and ensure the device is used only in its rated voltage category.
What is the maximum operating temperature for the device?
The device can operate within a temperature range of 0°C to 45°C. Relative humidity should be less than 95% at temperatures between 10°C and 30°C, and less than 75% at temperatures between 30°C and 40°C. The storage temperature should be between -10°C and 60°C.
What are the different RCD test modes available?
The device offers several RCD test modes including RCD AUTO, which automatically tests different current levels (x½, x1, x5) and measures the tripping time. RCD TIME allows manual selection of the test current ratio (x½, x1, x2, x5), while RCD RAMP increases the current until the RCD trips. These modes help ensure accurate and reliable RCD testing.
What is the purpose of the phase sequence function?
The phase sequence function is used to verify the correct connection of three-phase systems. It displays '123' for a correct sequence (clockwise rotation) and '213' for an incorrect sequence (counter-clockwise rotation), helping to identify wiring errors in three-phase installations.
What is the loop impedance measurement used for?
Loop impedance measurement is used to determine the total resistance of a circuit loop, which is critical for ensuring that protective devices can operate effectively in the event of a fault. A low loop impedance allows protective devices to quickly interrupt the circuit, preventing overheating and potential fires.
What are the different test modes for the RCD function?
The RCD function includes modes such as RCD AUTO, which automatically tests different current levels and measures tripping time; RCD TIME, which allows manual selection of the test current ratio; and RCD RAMP, which gradually increases the current until the RCD trips. These modes help ensure accurate and reliable RCD testing.
What is the purpose of the zero function in the loop impedance measurement?
The zero function measures the inherent resistance of the test leads and subtracts this value from the loop impedance measurement. This helps to eliminate any errors caused by the resistance of the test leads, ensuring a more accurate measurement of the actual loop impedance.
What are the safety standards the device complies with?
The device complies with several European Union directives including 2014/30/EU for electromagnetic compatibility, 2014/35/EU for low voltage, 2014/53/EU for RED, and 2011/65/EU for RoHS. It also meets the EN 61326, EN 61010-1, and EN 61557 standards for electrical safety and testing equipment.
What is the battery life of the device?
The device is powered by 8 x 1.2V Ni-MH batteries (2500mAh) and has a typical battery life of approximately 15 hours. It is designed for use in CAT III 600V environments and is rated for IP65 protection against dust and water.