Baumer TER8 (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the temperature range for the TER8 sensor?
The TER8 sensor measures temperatures of liquids and solids within the range of –40 … 135 °C. It must only be used with media that are compatible with its housing material and sensor tip.
What materials is the TER8 sensor made from?
The TER8 uses a PEEK Natura sensor tip, which is resistant to high temperatures up to 135 °C. The wetted parts are constructed from AISI 316L (1.4404), ensuring compatibility with various media.
How does the TER8 handle electrical connections?
The TER8 uses an M12-A, 4-pin connector for power and signal transmission. It supports both Pt100 resistance signals or a 4 … 20 mA current output depending on configuration settings.
What are the safety precautions when using the TER8 sensor?
The sensor may warm up to over 50 °C during operation, so protective measures should be taken against burns. Only trained personnel should handle installation and maintenance tasks.
How do I configure the TER8 for temperature measurement settings?
Use the FlexProgrammer tool with a PC to set parameters such as temperature range, measuring unit, sensor offset, damping, alarm values, and data logging options. Ensure all configurations are aligned with operational requirements.
What should I do if there is no signal from the transmitter?
Check that the power supply is connected correctly and ensure the sensor connections are secure. A short circuit or incorrect temperature range settings may also cause this issue; use FlexProgrammer to verify programmed parameters.
How can I clean, maintain, or repair the TER8 sensor?
Clean, disinfect, or sterilize the sensor as needed using CIP/SIP methods. Do not attempt repairs yourself—send damaged units directly to Baumer for service and maintenance.
What are the environmental conditions that affect the TER8's performance?
The operating temperature range is –40 … 85 °C, with storage temperatures ranging from –50 … 85 °C. Humidity must remain below 98 % RH to prevent condensation and ensure reliable operation.
What are the process conditions for using the TER8 sensor?
The TER8 can measure process temperatures between –40 … 115 °C with a maximum pressure of –1 … 5 bar. It is suitable for hygienic applications and requires proper mounting accessories to meet sanitary standards.
What are the technical specifications for the transmitter in the TER8 system?
The transmitter operates on an 8 … 35 V DC power supply with reverse polarity protection. It provides a 4 … 20 mA output signal, supports programmable damping settings from 0.0 to 30.0 seconds, and has temperature drift specifications of less than ± 0.01 % FS / °C.
Related products from Baumer
GMP 1,0
User manual 2 pages
TDP 13.06
User manual 2 pages
OADR 20I6475/S14F
User manual 40 pages
OADR 20I6585/S14F
User manual 40 pages
OADR 20I6465/S14F
User manual 40 pages
OADR 20I6575/S14F
User manual 40 pages
OADR 20I6565/S14F
User manual 40 pages
ISI36
User manual 16 pages
CombiLyz AFI4
User manual 68 pages
CombiLyz AFI4
User manual 40 pages
CombiLyz AFI4
User manual 36 pages
TA134
User manual 36 pages
TA201
User manual 36 pages
CombiLyz AFI5
User manual 40 pages
CombiLyz AFI5
User manual 68 pages
OADR 20I6485/S14F
User manual 40 pages
NE230
User manual 44 pages
PCD41
User manual 44 pages
OADM 20I6591
User manual 48 pages
OADM 20I6592
User manual 48 pages