TP-Link Omada EAP320 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the EAP on the ceiling?
To install the EAP on the ceiling, use the ceiling clip and secure it with M3×6 screws. Align the arrow on the EAP with the arrow on the bracket, then rotate it clockwise until it clicks into place. Connect an Ethernet cable to the ETHERNET port.
What is the typical network topology for the EAP?
The typical network topology for the EAP includes an Internet connection, a router, a switch, and the EAP connected to clients. The EAP Controller manages the EAPs centrally, and the Controller Host runs the EAP Controller software.
How to install the EAP on the wall?
To install the EAP on the wall, mark two points 98.6mm apart at the same height. Drill two 6mm holes, insert the wall anchors, and secure the EAP with screws. Ensure it is firmly attached and connect an Ethernet cable to the ETHERNET port.
Can the EAP be powered via PoE?
Yes, the EAP can be powered via PoE using a PoE switch or a PoE adapter. The PoE switch provides power over the Ethernet cable, while the PoE adapter allows power delivery through a separate cable.
How to connect the EAP to the network?
Connect the EAP to the network by attaching it to a switch or router. Ensure the Ethernet cable is properly connected to the ETHERNET port. The EAP will then communicate with the network and clients.
What is the maximum Ethernet cable length?
The maximum Ethernet cable length for the EAP is up to 100 meters. Ensure the cable is properly routed and secured to avoid signal degradation or physical damage.
How to manage the EAP remotely?
To manage the EAP remotely, connect it to the EAP Controller, which can be accessed via a computer running the EAP Controller software. This allows centralized management and configuration of the EAP.
What is the purpose of the EAP Controller?
The EAP Controller is used to centrally manage and configure multiple EAPs. It allows for monitoring, firmware updates, and policy enforcement across all connected EAPs in the network.
How to install the EAP using a ceiling bracket?
To install the EAP using a ceiling bracket, position the bracket and secure it with M3×6 screws. Attach the EAP to the bracket by aligning the arrows and rotating it clockwise until it clicks. Connect the Ethernet cable to the ETHERNET port.
What are the power options for the EAP?
The EAP can be powered either through a PoE switch or a supplied power adapter. PoE provides power over the Ethernet cable, while the power adapter uses a separate power source for the device.
Related products from TP-Link
Pharos CPE210
User manual 60 pages
EAP115 V4
User manual 60 pages
EAP245 V4
User manual 60 pages
EAP115
User manual 60 pages
EAP265
User manual 60 pages
EAP265 HD V1
User manual 60 pages
EAP225 V5
User manual 60 pages
EAP650-Outdoor V1
User manual 60 pages
EAP660 HD V2
User manual 60 pages
EAP653
User manual 60 pages
EAP690E
User manual 60 pages
EAP690E
User manual 60 pages
EAP115 V2
User manual 60 pages
EAP670
User manual 60 pages
EAP620
User manual 60 pages
EAP650 V2
User manual 60 pages
EAP610
User manual 60 pages
Wall-Plate Access Point
User manual 72 pages
EAP230-Wall V1
User manual 76 pages
EAP235-Wall V1
User manual 76 pages