TP-Link Wall-Plate Access Point (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to power the EAP?
The EAP can only be powered through a PSE device, such as a PoE switch. Ensure the PoE switch is properly connected to provide power and data to the EAP.
What is needed for IP address assignment?
A DHCP server, typically a router, is required to assign IP addresses to the EAPs and clients in your local network. This ensures proper communication between devices.
What tools are needed for installation?
You will need a pre-installed wall junction box, an RJ45 plug, a triangular screwdriver, a Phillips screwdriver, and a PoE switch to complete the installation.
Can the EAP be installed in an 86mm junction box?
Yes, the EAP can be installed in an 86mm wall junction box. Ensure the box is pre-installed with an Ethernet cable connected to a PoE switch for proper operation.
How to connect the Ethernet cable to the EAP?
Connect the Ethernet cable inside the junction box to the UPLINK+PoE port of the EAP. Ensure the cable is not under strain to avoid damage or connection issues.
What is the purpose of the faceplate?
The faceplate covers the front of the EAP and the junction box. It should be securely attached after connecting all cables to protect the internal components and provide a clean appearance.
How to install the EAP in a standard EU junction box?
The EAP can be mounted in a standard EU wall junction box. Ensure the box is pre-installed with an Ethernet cable connected to a PoE switch, and follow the installation steps to secure the device properly.
What is the role of the management host?
The management host is used to install and configure the EAP controller software. It allows you to manage multiple EAPs and set up a wireless network efficiently.
How to configure the EAPs for wireless network?
After installing the EAP controller software on the management host, start the controller and follow the configuration steps to set up a WLAN. Use the 'Adopt' function to change the EAP status from pending to connected.
What should I do if the junction box is too small?
If the junction box does not provide enough space for the EAP and Ethernet connection, use an open or deeper junction box to ensure proper installation and avoid cable strain or damage.
Related products from TP-Link
Pharos CPE210
User manual 60 pages
EAP115 V4
User manual 60 pages
EAP245 V4
User manual 60 pages
EAP115
User manual 60 pages
EAP265
User manual 60 pages
EAP265 HD V1
User manual 60 pages
EAP225 V5
User manual 60 pages
EAP650-Outdoor V1
User manual 60 pages
EAP660 HD V2
User manual 60 pages
EAP653
User manual 60 pages
EAP690E
User manual 60 pages
EAP690E
User manual 60 pages
EAP115 V2
User manual 60 pages
EAP670
User manual 60 pages
EAP620
User manual 60 pages
EAP650 V2
User manual 60 pages
EAP610
User manual 60 pages
EAP230-Wall V1
User manual 76 pages
EAP235-Wall V1
User manual 76 pages
TL-EAP115-WALL
User manual 76 pages