LD Systems U518 BPH2 (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I turn the receiver on or off?
To turn the receiver on, press and hold the power switch for approximately 2 seconds. To turn it off, press and hold the power switch again for the same duration.
What does the OLED display show?
The OLED display shows information such as radio frequency, signal levels, battery status, and system settings. It also indicates menu options for adjusting settings.
How do I synchronize the transmitter with the receiver?
To synchronize, align the infrared ports of the transmitter and receiver within 10 cm, then turn on the transmitter. Access the Edit menu on the receiver and select 'IR SYNC RUN' to initiate the synchronization process.
How do I perform an automatic frequency search?
To perform an automatic frequency search, access the Edit menu and select 'FREQ AUTO RUN'. The system will scan for an interference-free frequency, and the result will be automatically enabled for use.
How do I adjust the frequency group?
To adjust the frequency group, access the Edit menu and select 'GROUP'. Choose one of the 8 available groups (01 to 08) by rotating the encoder. Confirm your selection with the MENU button.
How do I adjust the frequency channel?
To adjust the frequency channel, access the Edit menu and select 'CHANNEL'. Choose one of the 12 available channels (01 to 12) by rotating the encoder. Confirm your selection with the MENU button.
How do I set the transmitter name?
To set the transmitter name, access the Edit menu and select 'NAME'. Choose letters, numbers, or symbols for each of the 8 digits by rotating the encoder and confirming with the MENU button.
How do I enable the pilot tone?
To enable the pilot tone, access the Edit menu and select 'PILOT TONE'. Use the encoder to choose 'ON' for activating the pilot tone or 'OFF' to disable it. Confirm your selection with the MENU button.
How do I adjust the squelch setting?
To adjust the squelch setting, access the Edit menu and select 'SQUELCH'. Use the encoder to choose between 'LOW', 'MID', or 'HIGH' to control background noise suppression. Confirm your selection with the MENU button.
How do I check the battery status?
The battery status of the transmitter is displayed on the receiver's screen. A full charge is indicated by icons showing approximately 70% or 30% remaining. If the 'LOW BATTERY' icon appears, replace the batteries immediately.
Related products from LD Systems
LDWS100ML
User manual 29 pages
LDWS100ML
User manual 76 pages
LDWS100ML
User manual 84 pages
LDWS100ML
User manual 84 pages
LDWS100ML
User manual 96 pages
LDWS100MH1
User manual 29 pages
LDWS100MH1
User manual 76 pages
LDWS100MH1
User manual 84 pages
LDWS100MH1
User manual 84 pages
LDWS100MH1
User manual 96 pages
LDWS1000MW
User manual 29 pages
LDWS1000MW
User manual 76 pages
LDWS1000MW
User manual 84 pages
LDWS1000MW
User manual 84 pages
LDWS1000MW
User manual 96 pages
LDWS100GC
User manual 29 pages
LDWS100GC
User manual 76 pages
LDWS100GC
User manual 84 pages
LDWS100GC
User manual 84 pages
LDWS100GC
User manual 96 pages