Log in


or


google Continue with Google facebook Continue with Facebook

Already have an account?

Dräger CMS (136 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Dräger CMS is a compact and reliable analysis tool designed for the detection and measurement of gases in various industrial and environmental applications. It features advanced sensor technology for accurate and real-time gas monitoring. The device is suitable for use in environments where precise and continuous gas analysis is required, such as in chemical plants, refineries, and environmental monitoring stations. Its robust construction ensures durability under challenging operating conditions. The CMS provides clear and easy-to-read display of measurement results, and it supports a wide range of gases, making it a versatile solution for gas detection and analysis.

Frequently Asked Questions

How to check the analyzer's seal before safety-critical measurements?

Attach the extension hose adapter to the gas inlet of the analyzer. Power on the analyzer and insert a chip, such as the training chip. Start the measurement. During the measurement, close the gas inlet of the adapter for about 15 seconds by squeezing the extension hose near the adapter. If the 'Pump Error' message appears on the display, the seal test is successful. If not, contact Dräger for assistance. Finally, power off the analyzer.

What are the safety warnings for using the analyzer in explosive areas?

Only use equipment approved for explosive areas under the conditions specified in the certification. Do not modify the equipment or use defective parts. Always follow relevant legal regulations. If you encounter any issues, contact Dräger for support.

How to replace or install batteries in the analyzer?

Use only the specified battery types: Ralston, Duracell, Rayovac Alkaline LR6, MN 1500 LR6, or rechargeable Alkaline AA (with Rayovac Charger PS1 or PS3). Turn off the analyzer by setting the slider to position 0. Remove the cover by unscrewing the internal hex screw. Replace old batteries with new ones, ensuring correct polarity. Secure the cover and dispose of used batteries according to the disposal guidelines on page 29.

How to check the battery voltage in the analyzer?

Set the slider to position 1 to initiate a self-test. The analyzer will activate all display elements and check the battery voltage during the self-test. Four battery symbols indicate full battery capacity, corresponding to approximately 450 measurement minutes. One symbol indicates the battery needs replacement. If the voltage drops below the minimum operating level, the analyzer will shut off. Replace the battery and refer to page 8 for instructions.

How to set or change the language on the analyzer?

To change the language, set the slider to position 1 and hold the side button until 'Setup CMS' appears. Press the side button multiple times until 'Language' is displayed. Hold the side button to select the desired language, such as English. Confirm the selection and return to the main menu by setting the slider back to position 0.

What is the purpose of the DataRecorder in the analyzer?

The analyzer is equipped with an integrated DataRecorder to store measurement results. The stored data can be displayed on the LCD screen. The DataRecorder mode can be set to 'Off', 'Manual', or 'Auto' to control when measurements are recorded.

How to perform a measurement with the analyzer?

Turn on the analyzer, select the appropriate chip, insert it into the analyzer, and start the measurement. The analyzer will display the measurement data in real-time. After the measurement, you can stop the process or start a new one. The results can be reviewed or deleted as needed.

What are the technical specifications of the Dräger CMS Analyzer?

The Dräger CMS Analyzer is designed for short-term measurement of various gas and vapor hazards in the air. Each chip can perform up to 10 measurements. The analyzer includes an integrated DataRecorder for storing and displaying measurement results. It is suitable for use in hazardous environments and complies with relevant safety standards.

How to handle errors or malfunctions with the analyzer?

If you encounter any issues or malfunctions, contact Dräger for support. Only use original Dräger parts for maintenance to ensure proper functionality. If the analyzer displays an error message, follow the troubleshooting steps provided in the manual or reach out to the service team for assistance.

How to dispose of the analyzer and its batteries?

Follow the disposal guidelines provided in the manual. Used batteries should be disposed of according to local regulations. Ensure that the analyzer is handled and disposed of in an environmentally responsible manner to prevent any potential hazards.

Send answer

Additional user manuals for the same series

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5