Dräger CMS (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the Remote System?
The Remote System, when used with the Dräger CMS Analyzer, measures gas and vapor hazardous substances at inaccessible locations such as channels, shafts, or storage tanks. It helps reduce the analyzer's operating time by up to 50% depending on the Remote System's usage.
What components make up the Remote System?
The Remote System consists of a pump, a sampling hose (3 m), an adapter, a float, and an optional telescopic probe (1 m). These components work together to enable remote sampling and measurement of hazardous substances.
How do I prepare the sampling hose for use?
Use an original Dräger sampling hose. Insert the adapter into the analyzer's gas inlet, push slightly, and turn it a quarter of a turn. Ensure the hose is not pinched or compressed during installation to avoid measurement errors.
What is the function of the float in the system?
The float is used to measure substances above a liquid surface. It allows the sampling hose to be inserted into the appropriate channel of the float, ensuring the hose is centered and the opening remains unobstructed for accurate sampling.
How long should I wait for the cleaning phase before starting measurements?
The cleaning phase is necessary to eliminate or minimize influences such as memory effects and dead volume. The duration depends on factors like the type and concentration of the gas, the material and condition of the sampling hose. Wait for the required cleaning time as indicated by the analyzer's display.
What are the recommended cleaning times for different gases?
Cleaning times vary depending on the gas being measured. For example, aceton requires 2 minutes, ammonia requires 1 minute, and benzene requires 1 minute. Refer to the specific chip's manual for precise cleaning times for each substance.
What should I do if the sampling hose becomes clogged?
A clogged sampling hose can lead to inaccurate measurements. Ensure the hose is not pinched or compressed during installation. If clogging occurs, check for blockages and clean the hose before proceeding with measurements.
What safety precautions should I take when using the Remote System?
Always check the airflow through the extension hose before use to prevent measurement errors. Avoid pinching, compressing, or obstructing the sampling hose during measurements. Ensure the system is used only in safe conditions and follow all safety warnings provided in the manual.
Can I use non-original Dräger parts for maintenance?
Only use original Dräger parts for maintenance and repairs. Using non-original parts may compromise the system's performance and safety. Always follow the manufacturer's guidelines for replacement and servicing.
What should I do if the system is not functioning properly?
If the system is not working correctly, refer to the troubleshooting section of the manual. Check for common issues such as blocked hoses, incorrect connections, or faulty components. If the problem persists, contact Dräger support for further assistance.
Related products from Dräger
X-am 7000
User manual 56 pages
X-am 7000
User manual 64 pages
X-am 7000
User manual 120 pages
X-am 2500
User manual 248 pages
X-am 2500
User manual 328 pages
X-am 2500
User manual 352 pages
X-am 2500
User manual 400 pages
X-am 2500
User manual 420 pages
X-am 5600
User manual 396 pages
Polytron 8900 UGLD
User manual 2 pages
Polytron 8900 UGLD
User manual 122 pages
Polytron 2000
User manual 8 pages
Polytron 2000
User manual 32 pages
X-zone 5000
User manual 8 pages
Pac 3500
User manual 99 pages
Pac 5500
User manual 99 pages
X-am 3500
User manual 194 pages
X-am 3500
User manual 196 pages
DrugTest 5000
User manual 22 pages
DrugTest 5000
User manual 30 pages