Hozelock 2220 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the warranty period for this product?
This product comes with a 2-year guarantee, ensuring coverage for any manufacturing defects within this period.
How do I install the batteries?
Insert two 1.5V 'AA' (LR6) Alkaline batteries, ensuring the correct polarity. Do not use rechargeable batteries. Make sure the front panel is securely attached after installation.
How do I set the start time for automatic watering?
Turn the dial fully clockwise to the START TIME position. The timer will then operate at this time each day until reset. No adjustment is needed if you switch programs.
What should I do if the valve opens but no water flows?
Check that the tap is fully open. Ensure the timer is correctly connected to the water supply and that the batteries are functioning properly.
How do I delay the first start time?
Press the button the number of times corresponding to the hours you want to delay the start. The LED will flash to confirm the delay setting.
What happens if the batteries are low?
The timer enters a failure prevention mode, preventing operation until new batteries are installed. The LED will flash red to indicate this mode is active.
How do I check the battery status?
Press and hold the 'Water Now' button. A green LED indicates the batteries are fine, while a red LED means they need to be replaced.
Can I use this timer with a rainwater butt?
Yes, this timer can be used with an outdoor rainwater butt that is higher than the area to be watered, provided it is connected via a gravity-fed system.
What is the maximum operating pressure for this timer?
This timer is suitable for use with mains water up to a maximum pressure of 10 bar. It is not designed for use in sub-zero temperatures.
How do I stop the manual watering function?
Press the 'Water Now' button again at any time to close the valve. The LED will stop flashing, indicating the manual watering has been stopped.