SICK GR18 Inox (117 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to mount the GRTE18(S)V sensor?
Mount the sensor using a suitable mounting bracket from the SICK accessory range. Ensure the maximum permissible tightening torque of 90 Nm is not exceeded.
What is the maximum tightening torque for the sensor?
The maximum permissible tightening torque for the GRTE18(S)V sensor is 90 Nm. Exceeding this may damage the sensor or affect its performance.
What are the electrical installation requirements?
Connect the sensors in a voltage-free state (UV = 0 V). Ensure all electrical connections are made before applying voltage. The green LED on the sensor will light up once power is applied.
What is the operating voltage range for the sensor?
The operating voltage range for the GRTE18(S)V sensor is 10 to 30 V DC. Refer to the technical specifications for detailed information.
How to align the sensor with the object?
Align the sensor so that the emitted light beam hits the center of the object. Ensure the optical opening (front screen) is completely clear. Use the LED indicators to verify correct alignment.
What is the sensing range of the sensor?
The sensing range of the GRTE18(S)V sensor can be up to 1,000 mm. The actual range depends on the object's remission capability and the distance from the background. Refer to the provided diagrams for detailed information.
How to adjust the sensitivity of the sensor?
Adjust the sensitivity using the potentiometer (type: 270°). Rotate clockwise to increase sensitivity, and counterclockwise to decrease it. Place the object within the sensing range, then remove it from the beam path to confirm the setting.
What should I do if the green LED does not light up?
If the green LED does not light up, check the power supply and all electrical connections. Ensure there is a stable power supply without interruptions. If the power supply is correct, the sensor may be faulty and should be replaced.
What if the yellow LED is flashing?
A flashing yellow LED indicates the sensor is ready for operation but the operating conditions may not be ideal. Fully align the light beam with the object, clean the optical surfaces, and readjust the sensitivity using the potentiometer.
What if the yellow LED does not light up when an object is in the beam path?
If the yellow LED does not light up when an object is in the beam path, the sensitivity may be set too low or the distance between the sensor and the object may be too long. Increase the sensing range and ensure the distance between the sensor and the background is sufficient.
Related products from SICK
W9-3
User manual 54 pages
W9-3
User manual 144 pages
LFP Inox
User manual 116 pages
WTB4-3P2100S13
User manual 38 pages
WL12G-3P3572S12
User manual 48 pages
WLA12L
User manual 212 pages
WE34
User manual 164 pages
WS34
User manual 131 pages
WS34
User manual 164 pages
WTF12L
User manual 232 pages
WTF12V
User manual 232 pages
OLS20
User manual 4 pages
PowerProx - WTT12L
User manual 70 pages
PowerProx - WTT12L
User manual 93 pages
PowerProx - WTT12L
User manual 140 pages
PowerProx - WTT12L
User manual 164 pages
RAY10
User manual 144 pages
RAY10
User manual 166 pages
RAY10
User manual 184 pages
WL34
User manual 164 pages