SKF TMSU 1 (64 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the TMSU 1 detect leaks?
The TMSU 1 detects leaks by using a sensitive piezoelectric sensor that picks up high-frequency ultrasonic sounds caused by pressure differences. These sounds are amplified and converted into an audible signal, allowing the user to locate the leak by following the loudest point.
What are the operating modes of the TMSU 1?
The TMSU 1 operates in two modes: non-continuous and continuous. In non-continuous mode, the user manually controls the operation and sensitivity, while in continuous mode, the device runs continuously with adjustable sensitivity for ongoing leak detection.
What is the amplification range of the TMSU 1?
The TMSU 1 offers 7 levels of amplification, ranging from 20 dB to 80 dB, allowing users to adjust sensitivity based on the environment and the type of leak being detected.
What type of batteries does the TMSU 1 use?
The TMSU 1 uses two AA batteries, either alkaline or rechargeable. Rechargeable batteries are compatible but may reduce battery life compared to alkaline batteries.
How long does the TMSU 1 last on a single charge?
The TMSU 1 can operate for approximately 20 hours on a single charge, though this may vary based on battery type, amplification level, and usage conditions.
What is the operating temperature range of the TMSU 1?
The TMSU 1 can operate in temperatures ranging from -10°C to +50°C (-14°F to +122°F), making it suitable for use in a variety of environmental conditions.
How do I adjust the sensitivity of the TMSU 1?
Sensitivity is adjusted using the yellow button on the device. Pressing the (+) side increases sensitivity, while pressing the (-) side decreases it, allowing the user to fine-tune the detection based on the leak's characteristics.
What happens when the battery level is low?
When the battery level is too low, the red LED indicator will not light up. Additionally, the user will receive an acoustical signal of five consecutive low-frequency beeps to indicate that the battery needs to be replaced or recharged.
Can the TMSU 1 be used in hazardous environments?
The TMSU 1 should not be used in areas where there is a risk of explosion. It is designed for use in safe environments and must be handled according to the safety guidelines provided in the manual.
What are the key components of the TMSU 1?
The TMSU 1 consists of a handheld unit with controls and a sensor, along with noise-reduction headphones. A rubber nozzle is also included for use in tight access areas, ensuring versatility in different inspection scenarios.
Related products from SKF
TKTL 21
User manual 116 pages
TKSA 40
User manual 432 pages
LAGD 1000
User manual 360 pages
TMRT 1
User manual 108 pages
TMEH 1
User manual 64 pages
TMEH 1
User manual 92 pages
TKRT 10
User manual 72 pages
LAGM 1000E
User manual 116 pages
LAGM 1000E
User manual 84 pages
LAGM 1000E
User manual 80 pages
TKRT 25M
User manual 80 pages
TMSP 1
User manual 84 pages
THGD 100
User manual 100 pages
TKRT 31
User manual 140 pages
TKRT 21
User manual 140 pages
TKBA 21
User manual 152 pages
TKBA 31
User manual 152 pages
TMVM 1
User manual 180 pages