DAB ACTIVE E 30/80 (224 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to properly install the pump?
The pump must be installed horizontally and securely anchored to the base. Ensure the intake port is horizontal and the discharge port is vertical. Avoid heavy metal pipes from exerting pressure on the pump ports, and use flexible tubing after the discharge to reduce vibrations.
What are the electrical connection requirements?
Electrical connections must be made by a qualified electrician. Ensure the voltage matches the motor's rating. Use a 1.5 mm² H05 RN-F cable with or without a plug. Always disconnect power for at least 5 minutes before performing any maintenance.
How to start the pump after a long period of inactivity?
Before starting, ensure the pump is fully filled with clean water. If the pump has been idle for a long time, use a screwdriver through the central hole on the cover to unlock the rotor. If the pump was drained, refill it with liquid before starting.
What are the operating conditions for the pump?
The pump operates within a temperature range of 0 to 40°C for ambient and 0 to 35°C for the liquid. The maximum operating pressure is 8 bar, and the relative humidity should not exceed 95%. Connections must be 1" GAS or NPT.
How to adjust the start pressure?
Use the trimmer on the control panel to set the start pressure. For the pressurization function, adjust between 3.5 and 8 bar. For the pressoflussostato function, adjust between 3 and 4.5 bar. Ensure the settings match the system requirements.
What is the function of the Dip-Switch?
The Dip-Switch allows selection of different functions such as pressurization, pressoflussostato, and RWS (rainwater collection). Set the switches to match the system configuration, and ensure both pumps in a two-pump setup are synchronized.
How to handle dry running conditions?
The system includes protection against dry running, which stops the pump if there is no water flow. If the external input is active, the system will automatically shut down to prevent damage. Ensure the pump is always filled with liquid before starting.
What are the safety features of the pump?
The pump includes overpressure protection, anti-cycling protection, and an alarm system for dry running. It also has a built-in non-return valve and pressure gauge. These features help prevent damage and ensure safe operation under various conditions.
How to connect the external input?
Use the faston connector for the external input, ensuring the correct size and alignment. For two-pump systems, parallelize the external inputs and connect them to the respective RJ ports on the control boards. Always follow the manufacturer's guidelines for proper wiring.
What are the maintenance requirements?
Regularly inspect the pump for leaks and ensure all connections are secure. Clean the intake filter and check for any signs of wear or damage. Replace the electronic board if necessary, and follow the provided diagram for troubleshooting and maintenance procedures.
Related products from DAB
Divertron
User manual 76 pages
Divertron
User manual 121 pages
Divertron
User manual 64 pages
DIVERTRON 650
User manual 121 pages
DTRON3
User manual 206 pages
DIVERTRON 900
User manual 121 pages
3 MICRA HS
User manual 19 pages
ACTIVE E 30/80 (6)
User manual 20 pages
ACTIVE E 50/50 (6)
User manual 20 pages
ACTIVE EC 25/80 (6)
User manual 20 pages
ACTIVE J 62
User manual 20 pages
ACTIVE J 62
User manual 224 pages
ACTIVE J 62
User manual 156 pages
ACTIVE J 82
User manual 20 pages
ACTIVE J 82
User manual 156 pages
ACTIVE J 82
User manual 224 pages
ACTIVE J 92
User manual 20 pages
ACTIVE J 92
User manual 156 pages
ACTIVE J 92
User manual 224 pages
ACTIVE J132
User manual 20 pages