SKF 226400 E (160 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum pressure of the 226400 E model?
The 226400 E model has a maximum pressure of 300 MPa (43,500 psi). This pressure rating is critical for ensuring safe and effective operation during oil injection tasks.
What is the volume per stroke of the 226400 E?
The 226400 E delivers a volume of 0.23 cm³ (0.014 in³) per stroke, which is essential for precise control during oil injection processes.
What safety precautions should be taken when using the equipment?
Always ensure the equipment is operated by trained personnel, wear proper personal protective gear, and inspect the equipment and accessories before use. Avoid using damaged components and ensure all air is removed from the hydraulic system before pressurizing.
What type of hydraulic oil should be used with the 226400 E?
Use clean recommended hydraulic oils such as SKF LHMF 300 or LHDF 900. Avoid glycerin or water-based fluids as they can cause premature equipment wear or damage.
How should the oil container be filled?
Immerse the nozzle in oil and retract the piston using the handle. Point the nozzle upwards and slightly depress the valve ball to allow air to escape. The oil container can be removed and refilled without releasing hydraulic pressure.
What is the recommended oil viscosity for mounting and dismounting bearings?
For mounting bearings, use an oil with a viscosity of approximately 300 mm²/s at operating temperature. For dismounting, use an oil with a viscosity of about 900 mm²/s at operating temperature to ensure smooth and safe operation.
What should be done after reaching the required pressure?
Once the required pressure is achieved, open the release valve to allow excess oil to flow back to the reservoir. This helps prevent over-pressurization and ensures the system remains safe and functional.
What are the maintenance requirements for the oil injector?
Ensure no air is trapped in the hydraulic system when replacing oil or after maintenance. Use only clean, recommended hydraulic oils and avoid mixing different brands to prevent contamination and system damage.
What are the recommended oil cleanliness levels?
The oil cleanliness level should meet or exceed ISO 4406:1999 20/18/15. This ensures minimal contamination, which is crucial for preventing wear and maintaining the integrity of the oil injector.
What are the storage conditions for the equipment?
Store the equipment in a dry, well-ventilated area with a relative humidity of less than 65% and a temperature range of +10°C to +40°C. Avoid direct sunlight, UV radiation, and exposure to nearby heat or cold sources.
Related products from SKF
226400 E/400
User manual 56 pages
FlowMaster II
User manual 56 pages
226400
User manual 64 pages
729124
User manual 64 pages
729124
User manual 64 pages
729124
User manual 136 pages
TMJL 100
User manual 64 pages
TMJL 100
User manual 136 pages
TMJL 50
User manual 64 pages
TMJL 50
User manual 136 pages
728619 E
User manual 84 pages
728619 E
User manual 188 pages
THAP 030
User manual 102 pages
THAP 150
User manual 102 pages
CLU4
User manual 108 pages
THAP 030E
User manual 164 pages
THAP 030E
User manual 397 pages
THAP 400
User manual 164 pages
THAP 300E
User manual 164 pages
THAP 300E
User manual 397 pages