SKF 728619 E (188 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum hydraulic pressure for the SKF 728619 E?
The maximum hydraulic pressure for the SKF 728619 E is 150 MPa (21,750 psi). Exceeding this pressure can lead to equipment damage and is not recommended.
How does the SKF 728619 E operate in different pressure ranges?
The SKF 728619 E operates with a high flow rate of 20 cm³ per stroke below 2.5 MPa (362 psi). Above this pressure, the flow rate automatically decreases to 1 cm³ per stroke.
What type of hydraulic oil should be used with the SKF 728619 E?
Use clean hydraulic oils such as SKF LHMF 300 or LHDF 900. Avoid glycerin or water-based fluids as they can cause premature wear or damage to the equipment.
What safety precautions should be taken when using the SKF 728619 E?
Ensure the equipment is operated only by trained personnel, wear proper personal protective gear, inspect the equipment before use, and never use damaged components. Also, do not exceed the maximum hydraulic pressure or adjust safety valves beyond the maximum working pressure.
How should the oil container be filled for the SKF 728619 E?
Fill the oil container until the oil level reaches the bottom of the filling pipe. Do not overfill, as this can cause malfunctions. Ensure the oil system is free of air and use only clean hydraulic oils.
What is the purpose of the return connection on the SKF 728619 E?
The return connection allows oil to be returned to the oil container. It can be connected to an external oil reservoir if the oil container capacity is insufficient, ensuring proper system operation.
What should be done if the pressure exceeds the safe limit?
If the pressure exceeds 150 MPa (21,750 psi), the safety valve will automatically open to release the pressure. Always ensure the release valve is opened to let the oil return to the container after reaching the desired pressure.
What are the recommended operating conditions for the SKF 728619 E?
The pump should be operated in a horizontal position, and the oil viscosity should be maintained at 300 mm²/s (1,400 SUS) for mounting bearings or 900 mm²/s (4,100 SUS) for dismounting. Always use a pressure gauge to monitor the oil outlet pressure.
What are the key components of the SKF 728619 E?
The SKF 728619 E includes a two-stage pump, a pressure gauge, a double outlet adapter, a quick connection coupling, a quick connection nipple, and a high-pressure hose. It also comes with a pre-filled oil container and a 1-liter can of mounting fluid.
What should be done if the pump is not functioning properly?
Check for air in the oil system and ensure the oil is clean and free of contamination. If the issue persists, contact SKF for service or use genuine SKF replacement parts to maintain optimal performance.
Related products from SKF
1077600/SET
User manual 41 pages
226400 E
User manual 56 pages
226400 E
User manual 160 pages
226400 E/400
User manual 56 pages
FlowMaster II
User manual 56 pages
226400
User manual 64 pages
729124
User manual 64 pages
729124
User manual 64 pages
729124
User manual 136 pages
TMJL 100
User manual 136 pages
TMJL 100
User manual 64 pages
TMJL 50
User manual 64 pages
TMJL 50
User manual 136 pages
THAP 030
User manual 102 pages
THAP 150
User manual 102 pages
CLU4
User manual 108 pages
CLU4
User manual 108 pages
SMD 3
User manual 115 pages
THAP 030E
User manual 164 pages
THAP 030E
User manual 397 pages