Dell Networking S5000 (346 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the S5000 switch?
To install the S5000 switch, first attach the mounting brackets, then install the chassis into a 4-post rack or cabinet. Ground the rack, and install the Ethernet and/or Fibre Channel modules, power supplies, fan modules, and SFP+ or QSFP+ optics. Finally, supply power and power up the system.
What are the physical dimensions of the S5000?
The S5000 has a height of 1.71 inches (43.5 mm), width of 17.4 inches (441.9 mm), and depth of 28 inches (711.2 mm). It features a chassis design with 640Gbps switching bandwidth.
What modules can be installed in the S5000?
The S5000 supports 12-Port Ethernet modules (1G/10G speeds) in slots 0, 1, 2, and 3, and 12-Port Fibre Channel modules (2G/4G/8G speeds) only in slot 0. The valid slot numbers are from 0 to 11.
How many power supplies does the S5000 support?
The S5000 supports two hot-swappable power supplies. These can be configured with airflow directions from I/O to Utility or Utility to I/O. It is recommended to install two power supplies for redundancy and cooling.
What are the port numbering conventions for the S5000?
Even-numbered ports are located at the bottom of the I/O panel, while odd-numbered ports are at the top. The fixed 40GbE ports are numbered 48, 52, 56, and 60. The valid port numbers for each interface type are 0 to 47 for 1GbE, 0 to 63 for 10GbE, and 48, 52, 56, and 60 for 40GbE.
What is the purpose of the S5000 switch?
The S5000 is a 10G ToR switch designed for data center environments. It provides architectural flexibility for unified and virtualized environments by enabling converged LAN and SAN in a single rack unit form factor. It supports FCoE, FC, and various data center bridging features.
What safety precautions should I take when handling the S5000?
Always wear an ESD-preventive wrist or heel ground strap when handling the S5000 and its components to avoid electrostatic discharge damage. If any item is missing or damaged, contact your Dell Networking representative or reseller immediately.
How do I connect the power supplies to the S5000?
Install the power supplies in slots 0 and 3 on the Utility panel. Ensure that the power cables are securely connected and that the airflow direction is consistent across all components. Use AC or DC power cords based on your configuration.
What are the supported fan airflow directions for the S5000?
The S5000 supports two fan airflow directions: from I/O to Utility or from Utility to I/O. All fans and power supplies in a configuration must be in the same airflow direction. Mixing airflow directions is not allowed and will result in a software error.
What ports are available on the I/O panel of the S5000?
The I/O panel includes four fixed 40GbE QSFP+ ports, which also support 4 × 10GbE mode. There are four slots for pluggable modules, with slot 0 supporting both Ethernet and Fibre Channel modules, and slots 1, 2, and 3 supporting only Ethernet modules.
Related products from Dell
3000 Series
User manual 2 pages
3000 Series
User manual 28 pages
5000 Series
User manual 2 pages
5000 Series
User manual 2 pages
emulex PT1016
User manual 80 pages
PT1016
User manual 80 pages
PT1016
User manual 80 pages
PowerConnect Serie
User manual 150 pages
PowerConnect Serie
User manual 273 pages
M8428-k
User manual 172 pages
M8428-k
User manual 202 pages
PowerConnect 3548
User manual 266 pages
PowerConnect 3524P
User manual 266 pages
PowerConnect 3548P
User manual 266 pages
Networking N1500 Serie
User manual 268 pages
PowerConnect 2124
User manual 273 pages
PowerConnect PC6248
User manual 282 pages
PowerConnect PC6224F
User manual 282 pages
PowerConnect PC6224
User manual 282 pages
PowerConnect PC6248P
User manual 282 pages