Dell PT1016 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the pass-through module?
To install the pass-through module, first remove the pin cover from the connector pins at the back of the module. Locate an empty module bay in the server, and ensure the latching arm is in the unlatched position. Slide the module into the bay until it stops, then rotate the latching arm upward until it is flush against the front panel and seated in the latch.
What type of fiber optic cable should I use?
Use multimode fiber optic cable with short-wave lasers that meet the following specifications: 62.5/125 µm with a bandwidth of 200 MHz*km. The cable must adhere to the specified maximum and minimum lengths for different data rates, such as 300 meters at 1.0625 Gb/s or 150 meters at 2.125 Gb/s.
What are the recommended static precautions during installation?
Static-sensitive components in the computer equipment may be damaged during handling. To prevent this, use static precautions such as grounded wrist straps during the installation process to ensure proper electrostatic discharge protection.
How do I attach a fiber optic cable to the pass-through module?
Install the fiber optic cable between the pass-through module and the target device. Ensure the cable uses the correct connectors, such as LC, and adheres to the specified length and performance requirements for the intended data transfer rate.
What should I do if the selected module bay has a blank I/O module?
If the selected bay contains a blank I/O module, remove it before installing the pass-through module. This ensures the module has a proper slot to fit and function correctly.
What is the purpose of the latching arm on the pass-through module?
The latching arm secures the pass-through module in the server bay. It must be rotated upward until it is flush against the front panel and seated in the latch to ensure the module is properly locked and stable.
What are the minimum and maximum lengths for the fiber optic cable?
The fiber optic cable must meet specific length requirements depending on the data rate. For example, the maximum length at 1.0625 Gb/s is 300 meters, while the minimum length is 0.5 meters. At higher rates like 4.25 Gb/s, the maximum length is 70 meters.
Can I use a single fiber optic cable for multiple data rates?
The fiber optic cable must be selected based on the specific data rate requirements. Different data rates require different cable specifications, including length and bandwidth, to ensure optimal performance and signal integrity.
What should I do if the pass-through module does not latch properly?
If the latching arm does not seat properly, check that the module is fully inserted into the bay and that the latching arm is rotated upward until it is flush against the front panel. Ensure the cable is correctly connected and the module is securely locked in place.
Related products from Dell
emulex PT1016
User manual 80 pages
M8428-k
User manual 172 pages
M8428-k
User manual 202 pages
PowerConnect 3548
User manual 266 pages
PowerConnect 3524P
User manual 266 pages
PowerConnect 3548P
User manual 266 pages
Networking N1500 Serie
User manual 268 pages
PowerConnect PC6248
User manual 282 pages
PowerConnect PC6224F
User manual 282 pages
PowerConnect PC6224
User manual 282 pages
PowerConnect PC6248P
User manual 282 pages
PowerConnect PC6224P
User manual 282 pages
Networking S5000
User manual 346 pages