Dräger Aerotest 5000 (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should be taken when using the Dräger Aerotest 5000?
The Dräger Aerotest 5000 must be used only for its intended purpose as described in the manual. It is not suitable for use in explosive environments. Always follow the safety symbols and instructions provided in the manual. Use only original Dräger parts for maintenance and ensure that all operations are performed by trained professionals.
What are the technical specifications of the Dräger Aerotest 5000?
The Dräger Aerotest 5000 is designed for use with low-pressure systems ranging from 2.5 bar to 10 bar. It can also be used for high-pressure systems up to 300 bar when paired with the F 3002 pressure reducer. It measures various substances in the air, including oil, water vapor, carbon dioxide, carbon monoxide, and oxygen. It also records temperature, airflow volume, and pressure.
How do you prepare the Dräger Aerotest 5000 for use?
Before using the device, install the 6 AA alkaline batteries in the battery compartment. Ensure the device is properly connected to the power source or batteries. Follow the instructions for inserting the appropriate test tubes or the Dräger Oil Impactor. Make sure all test tubes are properly broken at the tip and that the arrow on the tube points away from the device.
What are the steps to start a test with the Dräger Aerotest 5000?
To start a test, power on the device by pressing and holding the green power button. Navigate through the menu to select 'Test beginnen' to initiate the measurement. The device will automatically calibrate the oxygen sensor to the ambient atmosphere. Ensure the device is in a well-ventilated area. Select the appropriate test program based on the type of air source and pressure range.
How do you interpret the results from the Dräger Aerotest 5000?
After completing the test, interpret the results based on the color change of the test tubes or the Impactor. For example, the oil concentration can be determined by comparing the color of the Impactor to the provided chart. For water vapor, break the tube at the marked point and observe the color change in the reagent. For carbon dioxide and carbon monoxide, measure the length of the color change on the scale provided.
What should you do if the device detects an overpressure condition?
If the Dräger Aerotest 5000 detects overpressure, a warning will be displayed, and the device will be set to a safe mode. The device must be sent to Dräger for inspection and recalibration. Do not attempt to adjust the device yourself. Ensure the system pressure is within the specified range before starting the test.
How do you adjust the system pressure during testing?
The system pressure can be adjusted using the throttle valve. Ensure the flow meter displays the required airflow. Check that the pressure is sufficient for the test. If the system pressure is different from the displayed value, enter the correct pressure using the device's keyboard. The device will automatically adjust to the entered pressure.
What should you do if you detect a foul odor during testing?
If a foul odor is detected at the sintered air outlet, stop the test immediately and press the 'not passed' button. Contaminated air can damage the device. If no foul odor is present, press the 'passed' button. The device will then perform a cleaning cycle to remove any residual contaminants from previous tests.
How do you maintain the Dräger Aerotest 5000?
Regular maintenance and inspections by qualified technicians are required. A calibration interval of 1 year is recommended. Use only original Dräger parts for repairs and replacements. Follow the instructions in the maintenance section of the manual. Ensure the device is stored in a dry and cool environment to prevent damage.
What are the recommended storage conditions for the Dräger Aerotest 5000?
The Dräger Aerotest 5000 should be stored in a dry and cool environment to prevent damage to the device. Avoid exposing the device to extreme temperatures or humidity. Ensure that the device is properly sealed and protected from dust and moisture. Regularly check the battery compartment and ensure that the device is stored in a safe and secure location.
Related products from Dräger
70
User manual 8 pages
DrugCheck 3000
User manual 26 pages
Alcotest 4000
User manual 26 pages
Porta Control
User manual 28 pages
Aerotest Simultan HP
User manual 44 pages
Prestor 5000
User manual 48 pages
Flow Check
User manual 52 pages
Flow Check
User manual 64 pages
Alcotest
User manual 58 pages
5820
User manual 100 pages
RZ 7000
User manual 134 pages
Alcotest 5000
User manual 186 pages
Alcotest 5000
User manual 560 pages