SICK W26 (154 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to align the sensor and receiver?
Align the sender with the receiver by positioning it so that the red light beam hits the receiver. Ensure there are no objects in the beam path. Use white paper or a reflector as an alignment aid. Both the sender and receiver must have a clear line of sight.
What are the safety precautions for installation?
Read the operating manual before installation. Only trained personnel should handle the installation, wiring, and configuration. Avoid exposing the sensor to direct UV radiation or weather conditions unless specified. Ensure the device is protected from moisture and contamination during operation.
What is the maximum allowable torque for the sensor?
The maximum allowable torque for the sensor is less than 1.3 Nm. Ensure this limit is not exceeded during installation or adjustment to prevent damage.
What are the electrical connection requirements?
Electrical connections must be made without voltage. Follow the pin assignments for connector connections and observe the wire color coding. Ensure all electrical connections are completed before applying power to the device.
How to configure the time functions?
Use the push-turn element to adjust the time functions. This allows setting the timing parameters for the sensor's operation. Ensure the settings are appropriate for the intended application and environmental conditions.
What is the purpose of the Teach button?
The Teach button is used to adjust the sensor's sensitivity and to set the light/dark switching mode. This allows customization of the sensor's response to different light conditions and object detection requirements.
What are the alarm and health outputs?
The alarm output indicates when the sensor is only partially operational, such as due to dirt or misalignment. The health output signals if the sensor is partially operational or if the wiring is broken. Both outputs help identify potential issues and ensure safe operation.
How to test the sensor's functionality?
Use the test input to turn off the sender and simulate object detection. Ensure no objects are between the sensor and receiver. Check the status LED and compare the output with the expected behavior in the test table. If the output does not match, review the operating conditions and check for faults.
What are the electrical specifications for the sensor?
The sensor operates on a DC voltage range of 10 to 30 volts. The wiring must use 0.14 mm² AWG26 cables. Follow the pin assignments and color coding for both sender and receiver connections to ensure proper operation.
How to handle multiple sensors in parallel?
When installing multiple sensors, alternate the sender and receiver positions for each pair. Maintain an adequate distance between pairs based on the sender's light spot diameter. This ensures optimal performance and minimizes interference between sensors.
Related products from SICK
W9-3
User manual 54 pages
W9-3
User manual 144 pages
LFP Inox
User manual 56 pages
WLA12L
User manual 212 pages
WE34
User manual 164 pages
WS34
User manual 131 pages
WS34
User manual 164 pages
WTF12L
User manual 232 pages
WTF12V
User manual 232 pages
WL34
User manual 164 pages
WT34
User manual 133 pages
GL6L
User manual 117 pages
GTB6L
User manual 160 pages
GTE6L
User manual 109 pages
GTE6L
User manual 130 pages
GTE6L
User manual 160 pages
GSE6L
User manual 119 pages
M4000 Standard
User manual 92 pages
LFH
User manual 48 pages
1049051
User manual 54 pages