Elcometer 415 (112 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I switch the Elcometer 415 on?
To switch on the Elcometer 415, press and hold the ON/OFF button until the Elcometer logo is displayed or press the probe against any hard surface, which will automatically turn the gauge on.
How do I switch the Elcometer 415 off?
To switch off the Elcometer 415, press and hold the ON/OFF button until the screen goes blank. The gauge will also turn off automatically after 1 minute of inactivity.
How do I set the beep volume on the Elcometer 415?
To set the beep volume, press the ' ' softkey, use the softkeys to highlight the volume option, and adjust the volume using the same keys. Press ' ' to set the volume or ' ' to cancel changes and return to the previous screen.
How do I set the screen brightness on the Elcometer 415?
To set the screen brightness, press the ' ' softkey, use the softkeys to highlight the brightness option, and adjust the brightness using the same keys. Press ' ' to set the brightness or ' ' to cancel changes and return to the previous screen. The default setting is 'Auto'.
How do I select the measurement units on the Elcometer 415?
To select the measurement units, press the ' ' softkey, use the softkeys to highlight 'µm/mil', and press ' ' to alternate between 'µm' and 'mil'. Press to return to the main reading screen.
How do I calibrate the Elcometer 415?
The Elcometer 415 can be calibrated using two methods: Zero Calibration and Smooth Calibration. Zero Calibration involves placing the probe on an uncoated metal surface, while Smooth Calibration requires using a foil of known thickness and an uncoated substrate. Calibration ensures accurate readings for different substrates.
What are the statistical values displayed by the Elcometer 415?
The Elcometer 415 displays the number of readings (n), average reading (X), lowest reading (Lo), and highest reading (Hi) as each measurement is taken. These statistics help assess the consistency and variability of the coating thickness measurements.
How do I check if the Elcometer 415 is calibrated correctly?
To check the calibration, place a calibration foil on the steel or aluminium check piece provided, then gently place the probe on the foil. The gauge should read the value printed on the foil label within ±1-3% or ±2.5μm (±0.1mil), whichever is greater. If not, re-calibrate using the appropriate method.
How do I upgrade the firmware on the Elcometer 415?
To upgrade the firmware, connect the Elcometer 415 to a PC running ElcoMaster® via USB. The software will inform you of any available updates. Click 'Update Gauge' to install the latest firmware version.
What are the available calibration check pieces for the Elcometer 415?
The Elcometer 415 includes calibration check pieces for steel (ferrous) and aluminium (non-ferrous). These are used to verify the accuracy of the gauge during calibration and ensure reliable readings on different substrates.
Related products from Elcometer
500
User manual 252 pages
138
User manual 32 pages
138
User manual 32 pages
138
User manual 48 pages
103
User manual 28 pages
456
User manual 28 pages
456
User manual 72 pages
456
User manual 72 pages
456
User manual 112 pages
456
User manual 112 pages
116C
User manual 33 pages
224
User manual 70 pages
2352
User manual 60 pages
2351
User manual 60 pages
2350
User manual 60 pages
2354
User manual 60 pages
2353
User manual 60 pages
550
User manual 80 pages
130
User manual 126 pages
MTG2
User manual 140 pages