Megger BM25 (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum insulation resistance the BM25 can measure?
The BM25 can measure insulation resistance up to 5 TΩ at 5000 V. For measurements above 100 GΩ, the instrument provides accurate readings, though accuracy may decline beyond specified limits.
How does the BM25 handle high voltage during testing?
The BM25 generates up to 2 mA at 5000 V. During testing, the high voltage warning LED and symbols flash to indicate the presence of hazardous voltage. The instrument automatically stops the test if the circuit breaks down or if excessive electrical noise is detected.
What are the available test voltage options on the BM25?
The BM25 offers selectable test voltages of 500 V, 1000 V, 2500 V, and 5000 V. A variable output voltage setting allows for incremental adjustments between 25 V and 5000 V in 25 V steps.
How long does it take to fully charge the BM25 battery?
The BM25 battery takes approximately 16 hours to fully recharge from a completely discharged state. An 8-hour charge will achieve at least 90% of full capacity. Charging should be done in a dry environment with temperatures between 0°C and 40°C.
What safety precautions should be taken when using the BM25?
The circuit under test must be de-energized and isolated before testing. The BM25 should only be used by trained personnel. Avoid touching circuit connections during testing, and ensure the test area is dry and clean to prevent electric shock or leakage currents.
How does the BM25 display test results?
The BM25 displays insulation resistance, leakage current, and capacitance values sequentially after each test. Results are also sent every 5 seconds via an isolated optical link to the RS232 connector for computer download.
What is the Polarization Index (PI) test on the BM25?
The Polarization Index (PI) test measures the dielectric absorption ratio by comparing resistance values after two time intervals (T1 = 1 minute, T2 = 10 minutes). The PI is calculated as the resistance at T2 divided by the resistance at T1. This test can be customized for specific time intervals.
What happens if the battery runs out during a test?
If the battery becomes exhausted during a test, the BM25 will automatically terminate the test. The instrument will also stop the test if an internal fault occurs, the insulation breaks down, or excessive electrical noise is detected.
How does the BM25 handle discharge after a test?
After a test, the BM25 automatically discharges the circuit and displays the decaying voltage until it falls below 50 V. The display also shows the final resistance and capacitance values, along with the leakage current.
What is the purpose of the 'BURN' feature on the BM25?
The 'BURN' feature is a low-current mode used for continuous testing under breakdown conditions. It helps assess the insulation condition of the circuit by simulating fault conditions, allowing for the detection of potential weaknesses in the insulation.
Related products from Megger
OTS80AF
User manual 12 pages
OTS60AF
User manual 12 pages
OTS 60PB
User manual 12 pages
OTS 60PB
User manual 56 pages
WM6
User manual 22 pages
SCITS100
User manual 35 pages
S1-5001
User manual 58 pages
BM21
User manual 71 pages
DET5/4D
User manual 72 pages
DET5/4R
User manual 72 pages
DET10C
User manual 79 pages
DET20C
User manual 79 pages
S1-5005
User manual 88 pages
BM80/2
User manual 89 pages
OTS 100AF/2
User manual 104 pages
OTS 80AF/2
User manual 104 pages
LCB2000/2
User manual 136 pages